Thermal Oxidative Aging and Service Life Prediction of Commercial Ethylene–Propylene–Diene Monomer Spacer Damping Composites for High–Voltage Transmission Lines
Polymers · 24.04.2024 · 16 (9) · 1186
DOI: 10.3390/polym16091186 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.04.2024. Verfasst von Yutong Zhou und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Grid Zhejiang Electric Power Co., Ltd. Research Institute, Hangzhou 310014, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Project of State Grid Zhejiang Electric Power Co., Ltd..
Abstract (Originalsprache)
The aging behavior and life prediction of rubber composites are crucial for ensuring high-voltage transmission line safety. In this study, commercially available ethylene–propylene–diene monomer (EPDM) spacer composites were chosen and investigated to elucidate the structure and performance changes under various aging conditions. The results showed an increased C=O peak intensity with increasing aging time, suggesting intensified oxidation of ethylene and propylene units. Furthermore, the surface morphology of commercial EPDM composites displayed increased roughness and aggregation after aging. Furthermore, hardness, modulus at 100% elongation, and tensile strength of commercial EPDM composites exhibited a general increase, while elongation at break decreased. Additionally, the damping performance decreased significantly after aging, with a 20.6% reduction in loss factor (20 °C) after aging at 100 °C for 672 h. With increasing aging time and temperature, the compression set gradually rose due to the irreversible movement of the rubber chains under stress. A life prediction model was developed based on a compression set to estimate the lifetime of rubber composites for spacer bars. The results showed that the product’s life was 8.4 years at 20 °C. Therefore, the establishment of a life prediction model for rubber composites can provide valuable technical support for spacer product services.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Grid Zhejiang Electric Power Co., Ltd. Research Institute, Hangzhou 310014, China.
- State Grid Smart Grid Research Institute Co., Ltd., Beijing 102209, China.
- State Grid Zhejiang Electric Power Co., Ltd., Hangzhou 310007, China.
Förderung
- Science and Technology Project of State Grid Zhejiang Electric Power Co., Ltd.
Zitieren
APA
Zhou, Y., Qiu, L., Xu, Z., Huang, S., Nie, J., Yin, H., Tu, F., & Zhao, Z. (2024). Thermal Oxidative Aging and Service Life Prediction of Commercial Ethylene–Propylene–Diene Monomer Spacer Damping Composites for High–Voltage Transmission Lines. Polymers, 16(9), 1186. https://doi.org/10.3390/polym16091186
Vancouver
Zhou Y, Qiu L, Xu Z, Huang S, Nie J, Yin H, et al. Thermal Oxidative Aging and Service Life Prediction of Commercial Ethylene–Propylene–Diene Monomer Spacer Damping Composites for High–Voltage Transmission Lines. Polymers. 2024;16(9):1186. doi:10.3390/polym16091186
BibTeX
@article{Zhou2024,
author = {Zhou, Yutong and Qiu, Lvchao and Xu, Zongchao and Huang, Shixuan and Nie, Jingkai and Yin, Hang and Tu, Feng and Zhao, Zhoufeng},
title = {Thermal Oxidative Aging and Service Life Prediction of Commercial Ethylene–Propylene–Diene Monomer Spacer Damping Composites for High–Voltage Transmission Lines},
journal = {Polymers},
year = {2024},
volume = {16},
number = {9},
pages = {1186},
doi = {10.3390/polym16091186}
}
EUVIMED