The Effect of Notch and Molecular Weight on the Impact Fracture Behavior of Polycarbonate
Polymers · 11.04.2024 · 16 (8) · 1072
DOI: 10.3390/polym16081072 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.04.2024. Verfasst von Xueting Xu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Institute of Aeronautical Materials, Beijing 100095, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The impact protection applications of polycarbonate (PC) products are gradually increasing. Due to the high sensitivity of PC to notches, research on notch impacts has become very important. In this paper, the impact performance of PC with two different molecular weights under different notch states was investigated. Three notch size factors, namely notch tip radius, notch angle, and notch center depth, were selected to design orthogonal experiments and research impact toughness. Subsequently, a single-factor study was conducted on the impact radius at the tip of the notch, which was the most important factor affecting the impact performance. Research shows that the brittle–ductile-transition tip radius of high-molecular-weight PC is 0.15 mm, and it has a higher impact toughness than low-molecular-weight PC during the brittle fracture process. The brittle–ductile-transition tip radius of lower molecular weight is 0.25 mm, while low-molecular-weight PC has a higher impact toughness during the ductile fracture process. The brittle and ductile fracture mechanisms of PC with different molecular weights were analyzed by observing the stress changes and cross-sectional morphology.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Beijing Institute of Aeronautical Materials, Beijing 100095, China.
- Beijing Engineering Research Center of Advanced Structural Transparence for the Modern Traffic System, Beijing 100095, China.
- Baimtec Material Co., Ltd., Beijing 100095, China.
Zitieren
APA
Xu, X., Wang, T., Sun, Q., Wang, B., Ge, Y., Lang, J., & Yan, Y. (2024). The Effect of Notch and Molecular Weight on the Impact Fracture Behavior of Polycarbonate. Polymers, 16(8), 1072. https://doi.org/10.3390/polym16081072
Vancouver
Xu X, Wang T, Sun Q, Wang B, Ge Y, Lang J, et al. The Effect of Notch and Molecular Weight on the Impact Fracture Behavior of Polycarbonate. Polymers. 2024;16(8):1072. doi:10.3390/polym16081072
BibTeX
@article{Xu2024,
author = {Xu, Xueting and Wang, Tao and Sun, Qiwei and Wang, Bolun and Ge, Yong and Lang, Jianlin and Yan, Yue},
title = {The Effect of Notch and Molecular Weight on the Impact Fracture Behavior of Polycarbonate},
journal = {Polymers},
year = {2024},
volume = {16},
number = {8},
pages = {1072},
doi = {10.3390/polym16081072}
}
EUVIMED