EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Properties’ Enhancement of PLA-Starch-Based Polymer Composite Using Sucrose

Sri Yustikasari Massijaya iD, Muhammad Adly Rahandi Lubis iD, Rossy Choerun Nissa, Yeyen Nurhamiyah iD, Wida Banar Kusumaningrum, Resti Marlina, Riska Surya Ningrum, Jajang Sutiawan iD, Iman Hidayat, Sukma Surya Kusumah iD, Lina Karlinasari iD, Rudi Hartono

Polymers · 09.04.2024 · 16 (8) · 1028

DOI: 10.3390/polym16081028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.04.2024. Verfasst von Sri Yustikasari Massijaya und 11 weiteren Autor:innen. Beteiligte Einrichtung: Forest Products Department, Faculty of Forestry and Environment, IPB University, Bogor 16680, Indonesia. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of North Sumatra, Universitas Sumatera Utara.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polylactic-acid–starch-based polymer composite (PLA/TPS) has good thermal stability for biocomposites. However, the physical and mechanical properties of PLA/TPS do not meet the standards. It needed additives to enhance its physical and mechanical properties. The aim was to improve the physical and mechanical properties of PLA/thermoplastic starch using sucrose. In addition, this study evaluated the enhancement of thermal properties of PLA/thermoplastic starch using sucrose. This study used sucrose as an additive to enhance the PLA/TPS composite. The addition of sucrose inhibits the degradation of biocomposites. This means that thermal stability increases. The thermal stability increased because the degree of crystallinity increased with the addition of sucrose, which was also proven in the XRD result. The addition of sucrose caused the morphology of the biocomposite to have pores. The FESEM results showed that biocomposites with the addition of sucrose had pores and gaps. These gaps result from low adhesion between polymers, causing a decrease in the mechanical and physical properties of the sample. Based on the FTIR spectra, biocomposite PLA/TPS blends with the addition of sucrose still have many hydroxyl groups that will lead to attracting other molecules or ions, such as oxygen or water. This phenomenon affects the physical and mechanical properties of materials. The physical and mechanical properties increased with sucrose addition. The best composite was prepared using 3% sucrose. This is because sucrose has a crystalline structure that affects the properties of biocomposites. However, the addition of 3% sucrose was not as effective as that of neat PLA.

Schlagwörter

Stichwörter der Autor:innen

biocompositeglycerolpolylactic acidsucrosethermoplastic starch

Autor:innen und Institutionen

  • Forest Products Department, Faculty of Forestry and Environment, IPB University, Bogor 16680, Indonesia.
  • Research Center for Biomass and Bioproducts, National Research and Innovation Agency, Bogor 16911, Indonesia.
  • Forest Products Department, Faculty of Forestry, Universitas Sumatera Utara, Medan 20353, Indonesia.

ORCID-Profile: Sri Yustikasari Massijaya, Muhammad Adly Rahandi Lubis, Yeyen Nurhamiyah, Jajang Sutiawan, Sukma Surya Kusumah, Lina Karlinasari

Förderung

  • University of North Sumatra
  • Universitas Sumatera Utara

Zitieren

APA

Massijaya, S. Y., Lubis, M. A. R., Nissa, R. C., Nurhamiyah, Y., Kusumaningrum, W. B., Marlina, R., Ningrum, R. S., Sutiawan, J., Hidayat, I., Kusumah, S. S., Karlinasari, L., & Hartono, R. (2024). Thermal Properties’ Enhancement of PLA-Starch-Based Polymer Composite Using Sucrose. Polymers, 16(8), 1028. https://doi.org/10.3390/polym16081028

Vancouver

Massijaya SY, Lubis MAR, Nissa RC, Nurhamiyah Y, Kusumaningrum WB, Marlina R, et al. Thermal Properties’ Enhancement of PLA-Starch-Based Polymer Composite Using Sucrose. Polymers. 2024;16(8):1028. doi:10.3390/polym16081028

BibTeX
@article{Massijaya2024,
  author = {Massijaya, Sri Yustikasari and Lubis, Muhammad Adly Rahandi and Nissa, Rossy Choerun and Nurhamiyah, Yeyen and Kusumaningrum, Wida Banar and Marlina, Resti and Ningrum, Riska Surya and Sutiawan, Jajang and Hidayat, Iman and Kusumah, Sukma Surya and Karlinasari, Lina and Hartono, Rudi},
  title = {Thermal Properties’ Enhancement of PLA-Starch-Based Polymer Composite Using Sucrose},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {8},
  pages = {1028},
  doi = {10.3390/polym16081028}
}
Kostenlos starten →