Novel Polymer Composites for Lead-Free Shielding Applications
Polymers · 08.04.2024 · 16 (7) · 1020
DOI: 10.3390/polym16071020 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 08.04.2024. Verfasst von Mazen A Baamer und 4 weiteren Autor:innen. Beteiligte Einrichtung: M.Sc. in Nuclear Engineering Program, College of Engineering, King Saud University, Riyadh P.O. Box 145111, Saudi Arabia. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University, King Abdullah City for Atomic and Renewable Energy (K.A.CARE).
Abstract (Originalsprache)
Polymer nanocomposites have recently been introduced as lead-free shielding materials for use in medical and industrial applications. In this work, novel shielding materials were developed using low-density polyethylene (LDPE) mixed with four different filler materials. These four materials are cement, cement with iron oxide, cement with aluminum oxide, and cement with bismuth oxide. Different weight percentages were used including 5%, 15%, and 50% of the cement filler with LDPE. Furthermore, different weight percentages of different combinations of the filler materials were used including 2.5%, 7.5%, and 25% (i.e., cement and iron oxide, cement and aluminum oxide, cement and bismuth oxide) with LDPE. Bismuth oxide was a nanocomposite, and the remaining oxides were micro-composites. Characterization included structural properties, physical features, mechanical and thermal properties, and radiation shielding efficiency for the prepared composites. The results show that a clear improvement in the shielding efficiency was observed when the filler materials were added to the LDPE. The best result out of all these composites was obtained for the composites of bismuth oxide (25 wt.%) cement (25 wt.%) and LDPE (50 wt.%) which have the lowest measured mean free path (MFP) compared with pure LDPE. The comparison shows that the average MFP obtained from the experiments for all the eight energies used in this work was six times lower than the one for pure LDPE, reaching up to twelve times lower for 60 keV energy. The best result among all developed composites was observed for the ones with bismuth oxide at the highest weight percent 25%, which can block up to 78% of an X-ray.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- M.Sc. in Nuclear Engineering Program, College of Engineering, King Saud University, Riyadh P.O. Box 145111, Saudi Arabia.
- Engineering and Project Management Sector, King Abdullah City for Atomic and Renewable Energy (K.A. CARE), Riyadh 11451, Saudi Arabia.
- Nuclear Technologies Institute, King Abdulaziz City for Science and Technology (KACST), Riyadh 11442, Saudi Arabia.
- Mechanical Engineering Department, College of Engineering, King Saud University, Riyadh 4545, Saudi Arabia.
ORCID-Profile: Ahmed A Basfar, Alhanouf Alrwais
Förderung
- King Saud University
- King Abdullah City for Atomic and Renewable Energy (K.A.CARE)
Zitieren
APA
Baamer, M. A., Alshahri, S., Basfar, A. A., Alsuhybani, M., & Alrwais, A. (2024). Novel Polymer Composites for Lead-Free Shielding Applications. Polymers, 16(7), 1020. https://doi.org/10.3390/polym16071020
Vancouver
Baamer MA, Alshahri S, Basfar AA, Alsuhybani M, Alrwais A. Novel Polymer Composites for Lead-Free Shielding Applications. Polymers. 2024;16(7):1020. doi:10.3390/polym16071020
BibTeX
@article{Baamer2024,
author = {Baamer, Mazen A and Alshahri, Saad and Basfar, Ahmed A and Alsuhybani, Mohammed and Alrwais, Alhanouf},
title = {Novel Polymer Composites for Lead-Free Shielding Applications},
journal = {Polymers},
year = {2024},
volume = {16},
number = {7},
pages = {1020},
doi = {10.3390/polym16071020}
}
EUVIMED