EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bioinspired Thermal Conductive Cellulose Nanofibers/Boron Nitride Coating Enabled by Co-Exfoliation and Interfacial Engineering

Xinyuan Wan, Xiaojian Xia, Yunxiang Chen, Deyuan Lin, Yi Zhou, Rui Xiong

Polymers · 14.03.2024 · 16 (6) · 805

DOI: 10.3390/polym16060805 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.03.2024. Verfasst von Xinyuan Wan und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Grid Fujian Electric Research Institute, Fuzhou 350007, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: science and technology project of State Grid Fujian Electric Power Co., Ltd.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal conductive coating materials with combination of mechanical robustness, good adhesion and electrical insulation are in high demand in the electronics industry. However, very few progresses have been achieved in constructing a highly thermal conductive composites coating that can conformably coat on desired subjects for efficient thermal dissipation, due to their lack of materials design and structure control. Herein, we report a bioinspired thermal conductive coating material from cellulose nanofibers (CNFs), boron nitride (BN), and polydopamine (PDA) by mimicking the layered structure of nacre. Owing to the strong interfacial strength, mechanical robustness, and high thermal conductivity of CNFs, they do not only enhance the exfoliation and dispersion of BN nanoplates, but also bridge BN nanoplates to achieve superior thermal and mechanical performance. The resulting composites coating exhibits a high thermal conductivity of 13.8 W/(m·K) that surpasses most of the reported thermal conductive composites coating owing to the formation of an efficient thermal conductive pathway in the layered structure. Additionally, the coating material has good interface adhesion to conformably wrap around various substrates by scalable spray coating, combined with good mechanical robustness, sustainability, electrical insulation, low-cost, and easy processability, which makes our materials attractive for electronic packaging applications.

Schlagwörter

Stichwörter der Autor:innen

boron nitridecellulose nanofiberslayered structuremechanical propertiesthermal conductive coating

Autor:innen und Institutionen

  • State Grid Fujian Electric Research Institute, Fuzhou 350007, China.
  • State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China.

Förderung

  • science and technology project of State Grid Fujian Electric Power Co., Ltd

Zitieren

APA

Wan, X., Xia, X., Chen, Y., Lin, D., Zhou, Y., & Xiong, R. (2024). Bioinspired Thermal Conductive Cellulose Nanofibers/Boron Nitride Coating Enabled by Co-Exfoliation and Interfacial Engineering. Polymers, 16(6), 805. https://doi.org/10.3390/polym16060805

Vancouver

Wan X, Xia X, Chen Y, Lin D, Zhou Y, Xiong R. Bioinspired Thermal Conductive Cellulose Nanofibers/Boron Nitride Coating Enabled by Co-Exfoliation and Interfacial Engineering. Polymers. 2024;16(6):805. doi:10.3390/polym16060805

BibTeX
@article{Wan2024,
  author = {Wan, Xinyuan and Xia, Xiaojian and Chen, Yunxiang and Lin, Deyuan and Zhou, Yi and Xiong, Rui},
  title = {Bioinspired Thermal Conductive Cellulose Nanofibers/Boron Nitride Coating Enabled by Co-Exfoliation and Interfacial Engineering},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {6},
  pages = {805},
  doi = {10.3390/polym16060805}
}
Kostenlos starten →