EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading

Fu Liu, Fangfang Li, Xuelei Li, Haobin Tian, Xudong Lei

Polymers · 13.03.2024 · 16 (6) · 804

DOI: 10.3390/polym16060804 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.03.2024. Verfasst von Fu Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the traditional mini split Hopkinson tension bar (SHTB) was enhanced for the dynamic mechanical performance testing of single fiber/resin interface of composites. Single Aramid III fibers were modified using a polyamine modification treatment. Quasi-static and dynamic tensile tests of modified single Aramid III fibers were conducted using an electronic tensile testing machine and mini SHTB. The test results indicated that the surface modification employing the Catechol-Tetraethylenepentamine (Cat-TEPA) approach had a negligible effect on the tensile mechanical properties of single Aramid III fibers. The microdroplet method was introduced to measure the dynamic interfacial shear strength (IFSS) of Aramid III fiber/waterborne polyurethane resin using a mini SHTB. The dynamic shear test results revealed an increase in the dynamic shear strength of the modified Aramid III fiber/resin interface from 36.16 MPa to 41.51 MPa. Furthermore, the Scanning Electron Microscope (SEM) photography of the modified single Aramid III fiber after debonding exhibited regular grid structures on the debonding area, which can prevent debonding between the single fiber and the microdroplet, thereby enhancing interfacial shear performance.

Schlagwörter

Stichwörter der Autor:innen

Aramid IIIIFSSdynamic mechanical propertyfailure morphologymini SHTBsingle fibersurface modification

Autor:innen und Institutionen

  • School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209, China.
  • Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China.

Zitieren

APA

Liu, F., Li, F., Li, X., Tian, H., & Lei, X. (2024). Tensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading. Polymers, 16(6), 804. https://doi.org/10.3390/polym16060804

Vancouver

Liu F, Li F, Li X, Tian H, Lei X. Tensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading. Polymers. 2024;16(6):804. doi:10.3390/polym16060804

BibTeX
@article{Liu2024,
  author = {Liu, Fu and Li, Fangfang and Li, Xuelei and Tian, Haobin and Lei, Xudong},
  title = {Tensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {6},
  pages = {804},
  doi = {10.3390/polym16060804}
}
Kostenlos starten →