EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Strain Rate Behavior on Laminated Glass Interlayer Types for Cured and Uncured Polymers

Ahmed Elkilani iD, Hesham El-Emam iD, Alaa Elsisi iD, Ahmed Elbelbisi iD, Hani Salim

Polymers · 07.03.2024 · 16 (6) · 730

DOI: 10.3390/polym16060730 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 07.03.2024. Verfasst von Ahmed Elkilani und 4 weiteren Autor:innen. Beteiligte Einrichtung: Civil and Environmental Engineering, University of Missouri, Columbia, MO 65211, USA. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent explosions and impact events have highlighted the exposure of civil structures, prompting the need for resilient new constructions and retrofitting of existing ones. Laminated glass panels, particularly in glazed facades, are increasingly used to enhance blast resistance. However, the understanding of glass fragments and their interaction with the interlayer is still incomplete. This paper investigates experimentally the quasi-static and dynamic responses of cured and uncured polymers for seven different materials—two different products of polyvinyl butyral (PVB), two ethylene vinyl acetate products (EVA), one product of thermoplastic polyurethane (TPU), and two SentryGlas products (SG)—that were tested between 21 and 32 °C (69.8 and 89.6 °F), which is the recommended room temperature. In these experiments, the responses of PVB, EVA, TPU, and SG were evaluated under a quasi-static strain rate of 0.033 s−1 and compared to the results under a relatively higher strain rate of 2 s−1. Moreover, the high strain rate loading of the materials was accomplished using a drop-weight testing appliance to evaluate the engineering stress–strain response under strain rates between 20 and 50 s−1. The results demonstrated that with strain rates of 20 s−1, PVB behaved like a material with viscoelastic characteristics, but at 45 s−1 strain rates, PVB became a non-elastic material. SG, on the other hand, offered both a high stiffness and a high level of transparency, making it a very good alternative to PVB in structural applications. In contrast, after the maximum stress point, the response to the failure of the seven materials differed significantly. The tests provided ample information for evaluating alternative approaches to modeling these different materials in blast events.

Schlagwörter

Stichwörter der Autor:innen

cured and uncured polymershigh strain rateinterlayerlaminated glass

Autor:innen und Institutionen

  • Civil and Environmental Engineering, University of Missouri, Columbia, MO 65211, USA.
  • Civil Engineering, Southern Illinois University Edwardsville, Edwardsville, IL 62025, USA.

ORCID-Profile: Ahmed Elkilani, Hesham El-Emam, Alaa Elsisi, Ahmed Elbelbisi

Zitieren

APA

Elkilani, A., El-Emam, H., Elsisi, A., Elbelbisi, A., & Salim, H. (2024). The Influence of Strain Rate Behavior on Laminated Glass Interlayer Types for Cured and Uncured Polymers. Polymers, 16(6), 730. https://doi.org/10.3390/polym16060730

Vancouver

Elkilani A, El-Emam H, Elsisi A, Elbelbisi A, Salim H. The Influence of Strain Rate Behavior on Laminated Glass Interlayer Types for Cured and Uncured Polymers. Polymers. 2024;16(6):730. doi:10.3390/polym16060730

BibTeX
@article{Elkilani2024,
  author = {Elkilani, Ahmed and El-Emam, Hesham and Elsisi, Alaa and Elbelbisi, Ahmed and Salim, Hani},
  title = {The Influence of Strain Rate Behavior on Laminated Glass Interlayer Types for Cured and Uncured Polymers},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {6},
  pages = {730},
  doi = {10.3390/polym16060730}
}
Kostenlos starten →