EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Silicon Hybrid EPDM Composite with High Thermal Protection Performance

Chenyang Yan, Bo Chen, Xiangmei Li iD, Jiyu He iD, Xin Zhao, Yanli Zhu, Rongjie Yang

Polymers · 04.03.2024 · 16 (5) · 695

DOI: 10.3390/polym16050695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.03.2024. Verfasst von Chenyang Yan und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center for Flame Retardant Materials, School of Materials Science and Engineering, Beijing Institute of Technology, Bei…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Science and Technology Project of State Grid Corporation of China, the Science and Technology Project of the State Grid Corporation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of octaphenylsilsesquioxane (OPS), fumed silica, and silica aerogel on the thermal insulation properties of ethylene propylene diene monomer (EPDM) rubber were studied. On this basis, two kinds of fillers with good performances were selected to study the thermal insulation of an EPDM full-formula system. The results show that the addition of fumed silica or silica aerogel had a positive effect on the thermal insulation performance of EPDM rubber and its composite. A 30 wt% silica aerogel can be well dispersed in the EPDM rubber system and with a lower thermal conductivity compared with fumed silica. EPDM composite with 23.4 wt% fumed silica can produce more char residues at 1000 °C than at 500 °C in a burn-through test and formed the compact and porous char at 1000 °C, which had a lowest thermal conductivity. EPDM composite with fumed silica cannot be burned through 1000 °C burning, and comparison with silica aerogel revealed that it achieved the lowest back temperature and had a temperature of 388 °C after 800 s.

Schlagwörter

Stichwörter der Autor:innen

EPDMsilicasilica aerogelthermal insulation

Autor:innen und Institutionen

  • National Engineering Research Center for Flame Retardant Materials, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.
  • Beijing Chemical Industry Research Institute, Co., Ltd., Beijing 100080, China.
  • School of Mechatronical Engineering, Beijing Institute of Technology, Beijing 100081, China.

ORCID-Profile: Xiangmei Li, Jiyu He

Förderung

  • the Science and Technology Project of State Grid Corporation of China
  • the Science and Technology Project of the State Grid Corporation of China

Zitieren

APA

Yan, C., Chen, B., Li, X., He, J., Zhao, X., Zhu, Y., & Yang, R. (2024). Silicon Hybrid EPDM Composite with High Thermal Protection Performance. Polymers, 16(5), 695. https://doi.org/10.3390/polym16050695

Vancouver

Yan C, Chen B, Li X, He J, Zhao X, Zhu Y, et al. Silicon Hybrid EPDM Composite with High Thermal Protection Performance. Polymers. 2024;16(5):695. doi:10.3390/polym16050695

BibTeX
@article{Yan2024,
  author = {Yan, Chenyang and Chen, Bo and Li, Xiangmei and He, Jiyu and Zhao, Xin and Zhu, Yanli and Yang, Rongjie},
  title = {Silicon Hybrid EPDM Composite with High Thermal Protection Performance},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {5},
  pages = {695},
  doi = {10.3390/polym16050695}
}
Kostenlos starten →