EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive and Lithographic Manufacturing of Biomedical Scaffold Structures Using a Versatile Thiol-Ene Photocurable Resin

Michael Kainz, Stjepan Perak, Gerald Stubauer, Sonja Kopp, Sebastian Kauscheder, Julia Hemetzberger, Adrián Martínez Cendrero iD, Andrés Díaz Lantada iD, Disha Tupe, Zoltan Major, Dominik Hanetseder iD, Veronika Hruschka iD und 4 weitere

Polymers · 28.02.2024 · 16 (5) · 655

DOI: 10.3390/polym16050655 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.02.2024. Verfasst von Michael Kainz und 15 weiteren Autor:innen. Beteiligte Einrichtung: Functional Surfaces and Nanostructures, Profactor GmbH, 4407 Steyr-Gleink, Austria. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, Austrian Research Promotion Agency, European Union’s Horizon 2020 Research and Innovation Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive and lithographic manufacturing technologies using photopolymerisation provide a powerful tool for fabricating multiscale structures, which is especially interesting for biomimetic scaffolds and biointerfaces. However, most resins are tailored to one particular fabrication technology, showing drawbacks for versatile use. Hence, we used a resin based on thiol-ene chemistry, leveraging its numerous advantages such as low oxygen inhibition, minimal shrinkage and high monomer conversion. The resin is tailored to applications in additive and lithographic technologies for future biofabrication where fast curing kinetics in the presence of oxygen are required, namely 3D inkjet printing, digital light processing and nanoimprint lithography. These technologies enable us to fabricate scaffolds over a span of six orders of magnitude with a maximum of 10 mm and a minimum of 150 nm in height, including bioinspired porous structures with controlled architecture, hole-patterned plates and micro/submicro patterned surfaces. Such versatile properties, combined with noncytotoxicity, degradability and the commercial availability of all the components render the resin as a prototyping material for tissue engineers.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbiomimetic scaffoldphotopolymerisationthiol-ene

Autor:innen und Institutionen

  • Functional Surfaces and Nanostructures, Profactor GmbH, 4407 Steyr-Gleink, Austria.
  • Department of Mechanical Engineering, Universidad Politécnica de Madrid, 28006 Madrid, Spain.
  • Institute of Polymer Product Engineering, Johannes Kepler University, 4040 Linz, Austria.
  • Ludwig Boltzmann Institute for Traumatology, The Research Centre in Cooperation with AUVA, 1200 Vienna, Austria.
  • Austrian Cluster for Tissue Regeneration, 1200 Vienna, Austria.

ORCID-Profile: Adrián Martínez Cendrero, Andrés Díaz Lantada, Dominik Hanetseder, Veronika Hruschka, Susanne Wolbank, Michael Mühlberger, Elena Guillén

Förderung

  • European Union
  • Austrian Research Promotion Agency
  • European Union’s Horizon 2020 Research and Innovation Programme

Zitieren

APA

Kainz, M., Perak, S., Stubauer, G., Kopp, S., Kauscheder, S., Hemetzberger, J., Martínez Cendrero, A., Díaz Lantada, A., Tupe, D., Major, Z., Hanetseder, D., Hruschka, V., Wolbank, S., Marolt Presen, D., Mühlberger, M., & Guillén, E. (2024). Additive and Lithographic Manufacturing of Biomedical Scaffold Structures Using a Versatile Thiol-Ene Photocurable Resin. Polymers, 16(5), 655. https://doi.org/10.3390/polym16050655

Vancouver

Kainz M, Perak S, Stubauer G, Kopp S, Kauscheder S, Hemetzberger J, et al. Additive and Lithographic Manufacturing of Biomedical Scaffold Structures Using a Versatile Thiol-Ene Photocurable Resin. Polymers. 2024;16(5):655. doi:10.3390/polym16050655

BibTeX
@article{Kainz2024,
  author = {Kainz, Michael and Perak, Stjepan and Stubauer, Gerald and Kopp, Sonja and Kauscheder, Sebastian and Hemetzberger, Julia and Martínez Cendrero, Adrián and Díaz Lantada, Andrés and Tupe, Disha and Major, Zoltan and Hanetseder, Dominik and Hruschka, Veronika and Wolbank, Susanne and Marolt Presen, Darja and Mühlberger, Michael and Guillén, Elena},
  title = {Additive and Lithographic Manufacturing of Biomedical Scaffold Structures Using a Versatile Thiol-Ene Photocurable Resin},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {5},
  pages = {655},
  doi = {10.3390/polym16050655}
}
Kostenlos starten →