EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Poly(ester imide)s with Low Linear Coefficients of Thermal Expansion and Low Water Uptake (VII): A Strategy to Achieve Ultra-Low Dissipation Factors at 10 GHz

Masatoshi Hasegawa iD, Taro Fukuda, Junichi Ishii

Polymers · 28.02.2024 · 16 (5) · 653

DOI: 10.3390/polym16050653 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.02.2024. Verfasst von Masatoshi Hasegawa und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Faculty of Science, Toho University, 2-2-1 Miyama, Funabashi 274-8510, Chiba, Japan. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Resonac (Japan), Resonac Holdings Corp..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a series of ester-linked tetracarboxylic dianhydrides (TCDAs) with 2,6-naphthalene-containing longitudinally extended structures consisting of different numbers of aromatic rings (NAr = 6–8) was synthesized to obtain novel modified polyimides, poly(ester imide)s (PEsIs). These TCDAs were fully compatible with the conventional manufacturing processes of conventional polyimide (PI) systems. As an example, the PEsI film obtained from the ester-linked TCDA (NAr = 8) and an ester-linked diamine achieved unprecedented outstanding dielectric properties without the support of fluorinated monomers, specifically an ultra-low dissipation factor (tan δ) of 0.00128 at a frequency of 10 GHz (50% RH and 23 °C), in addition to an extremely high glass transition temperature (Tg) of 365 °C, extremely low linear coefficient of thermal expansion (CTE) of 6.8 ppm K−1, suppressed water uptake (0.24%), requisite film ductility, and a low haze. Consequently, certain PEsI films developed in this study are promising candidates for heat-resistant dielectric substrates for use in 5G-compatible high-speed flexible printed circuit boards (FPCs). The chemical and physical factors denominating tan δ are also discussed.

Schlagwörter

Stichwörter der Autor:innen

10 GHz2,6-naphthalene unit5Gdielectric constants (DK)dissipation factors (DF)flexible printed circuits (FPC)hazeheat resistancelinear coefficients of thermal expansion (CTE)poly(ester imide)spolyimideswater uptake

Autor:innen und Institutionen

  • Department of Chemistry, Faculty of Science, Toho University, 2-2-1 Miyama, Funabashi 274-8510, Chiba, Japan.

ORCID-Profile: Masatoshi Hasegawa

Förderung

  • Resonac (Japan)
  • Resonac Holdings Corp.

Zitieren

APA

Hasegawa, M., Fukuda, T., & Ishii, J. (2024). Poly(ester imide)s with Low Linear Coefficients of Thermal Expansion and Low Water Uptake (VII): A Strategy to Achieve Ultra-Low Dissipation Factors at 10 GHz. Polymers, 16(5), 653. https://doi.org/10.3390/polym16050653

Vancouver

Hasegawa M, Fukuda T, Ishii J. Poly(ester imide)s with Low Linear Coefficients of Thermal Expansion and Low Water Uptake (VII): A Strategy to Achieve Ultra-Low Dissipation Factors at 10 GHz. Polymers. 2024;16(5):653. doi:10.3390/polym16050653

BibTeX
@article{Hasegawa2024,
  author = {Hasegawa, Masatoshi and Fukuda, Taro and Ishii, Junichi},
  title = {Poly(ester imide)s with Low Linear Coefficients of Thermal Expansion and Low Water Uptake (VII): A Strategy to Achieve Ultra-Low Dissipation Factors at 10 GHz},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {5},
  pages = {653},
  doi = {10.3390/polym16050653}
}
Kostenlos starten →