EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study of the Friction Characteristics of Rubber Thermo-Mechanical Coupling

Junyu Liu, Meng Wang, Haishan Yin

Polymers · 21.02.2024 · 16 (5) · 596

DOI: 10.3390/polym16050596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.02.2024. Verfasst von Junyu Liu und 2 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Laboratory of Tire Advanced Equipment and Key Materials, Qingdao University of Science and Technology, Qingdao 266100, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The friction performance of tread rubber is related to the safety of the vehicle during driving, especially in terms of shifting speeds, cornering, and changing environmental factors. The experimental design used in this paper employed a self-developed automatic multi-working-condition friction tester to investigate the correlation between the friction coefficient of three tread formulations and various factors, including speed, pressure, temperature, side deflection angle, and lateral camber. This experimental study demonstrates that the coefficient of friction decreases with increasing load and increases with increasing sliding velocities due to changes in adhesion friction. Due to the increasing and decreasing changes in rubber adhesion and hysteresis friction caused by temperature, the coefficient of friction shows a tendency to increase and then decrease with the increase in temperature; thus, temperature has an important effect on the coefficient of friction. Based on the basic theory of friction and experimental research, the Dorsch friction model was modified in terms of temperature, and the analytical relationship between the rubber friction coefficient and the combined variables of contact pressure, slip velocity, and temperature was established, which is more in line with the actual situation of rubber friction. The model predictions were compared with the experimental results, and the error accuracy was controlled within 5%. This verifies the accuracy of the model and provides a theoretical basis for the study of rubber friction.

Schlagwörter

Stichwörter der Autor:innen

friction modelrubber frictionthermo-mechanical couplingtire rubber

Autor:innen und Institutionen

  • National Engineering Laboratory of Tire Advanced Equipment and Key Materials, Qingdao University of Science and Technology, Qingdao 266100, China.

Zitieren

APA

Liu, J., Wang, M., & Yin, H. (2024). A Study of the Friction Characteristics of Rubber Thermo-Mechanical Coupling. Polymers, 16(5), 596. https://doi.org/10.3390/polym16050596

Vancouver

Liu J, Wang M, Yin H. A Study of the Friction Characteristics of Rubber Thermo-Mechanical Coupling. Polymers. 2024;16(5):596. doi:10.3390/polym16050596

BibTeX
@article{Liu2024,
  author = {Liu, Junyu and Wang, Meng and Yin, Haishan},
  title = {A Study of the Friction Characteristics of Rubber Thermo-Mechanical Coupling},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {5},
  pages = {596},
  doi = {10.3390/polym16050596}
}
Kostenlos starten →