The Electrical Conductivity, EMI Absorption Shielding Performance, Curing Process, and Mechanical Properties of Rubber Composites
Polymers · 20.02.2024 · 16 (5) · 566
DOI: 10.3390/polym16050566 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 20.02.2024. Verfasst von Ján Kruželák und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Plastics, Rubber and Fibres, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Radlinského 9, 812…. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Research and Development Agency, agency VEGA.
Abstract (Originalsprache)
Three types of composites were tested for electromagnetic interference (EMI) absorption shielding effectiveness, the curing process, and their physical–mechanical properties. For the first type of composites, nickel–zinc ferrite, manganese–zinc ferrite, and both fillers in their mutual combinations were incorporated into acrylonitrile–butadiene rubber. The overall content of the filler, or fillers, was kept at 200 phr. Then, carbon black or carbon fibers were incorporated into each rubber formulation at a constant loading of—25 phr, while the content of magnetic fillers was unchanged, at —200 phr. This work focused on the understanding of correlations between the electromagnetic shielding parameters and electrical conductivity of composites in relation to their EMI absorption shielding effectiveness. The absorption shielding abilities of materials were evaluated within a frequency bandwidth from 1 MHz to 6 GHz. This study revealed good correlation among permittivity, conductivity, and EMI absorption effectiveness. Although the absorption shielding efficiency of composites filled only with ferrites seems to be the highest, the absorption maxima of those composites reached over 6 GHz. The application of carbon-based fillers resulted in the higher electrical conductivity and higher permittivity of composites, which was reflected in their lower absorption shielding performance. However, the composites filled with ferrites and carbon-based fillers absorbed electromagnetic radiation within the desired frequency range. The presence of carbon-based fillers caused improvement in the tensile behavior of composites. This study also demonstrated that the higher the ratio of nickel–zinc ferrite in combined magnetic fillers, the better the absorption shielding efficiency.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Plastics, Rubber and Fibres, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Radlinského 9, 812 37 Bratislava, Slovakia.
- Department of Electromagnetic Theory, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology in Bratislava, Iľkovičova 3, 812 19 Bratislava, Slovakia.
- Bizlink Technology, Trenčianska Teplá 1356, 914 01 Trenčianska Teplá, Slovakia.
ORCID-Profile: Ján Kruželák
Förderung
- Slovak Research and Development Agency
- agency VEGA
Zitieren
APA
Kruželák, J., Kvasničáková, A., Džuganová, M., Dosoudil, R., Hudec, I., & Krump, H. (2024). The Electrical Conductivity, EMI Absorption Shielding Performance, Curing Process, and Mechanical Properties of Rubber Composites. Polymers, 16(5), 566. https://doi.org/10.3390/polym16050566
Vancouver
Kruželák J, Kvasničáková A, Džuganová M, Dosoudil R, Hudec I, Krump H. The Electrical Conductivity, EMI Absorption Shielding Performance, Curing Process, and Mechanical Properties of Rubber Composites. Polymers. 2024;16(5):566. doi:10.3390/polym16050566
BibTeX
@article{Kruelk2024,
author = {Kruželák, Ján and Kvasničáková, Andrea and Džuganová, Michaela and Dosoudil, Rastislav and Hudec, Ivan and Krump, Henrich},
title = {The Electrical Conductivity, EMI Absorption Shielding Performance, Curing Process, and Mechanical Properties of Rubber Composites},
journal = {Polymers},
year = {2024},
volume = {16},
number = {5},
pages = {566},
doi = {10.3390/polym16050566}
}
EUVIMED