EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Innovation: Fabrication and Characterization of Mycelium-Based Green Composites for Modern Interior Materials Using Agro-Industrial Wastes and Different Species of Fungi

Worawoot Aiduang, Kritsana Jatuwong, Praween Jinanukul, Nakarin Suwannarach iD, Jaturong Kumla iD, Wandee Thamjaree, Thana Teeraphantuvat iD, Tanut Waroonkun iD, Rawiwan Oranratmanee, Saisamorn Lumyong

Polymers · 18.02.2024 · 16 (4) · 550

DOI: 10.3390/polym16040550 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.02.2024. Verfasst von Worawoot Aiduang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Office of Research Administration, Chiang Mai University, Chiang Mai 50200, Thailand. Die Arbeit wurde bisher 58-mal zitiert (Crossref) und nennt 127 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Fundamental Fund 2023, Chiang Mai University, Chiang Mai, Thailand, Fundamental Fund 2023, Chiang Mai University, and partially supported by Modern Frame. Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mycelium-based bio-composites (MBCs) represent a sustainable and innovative material with high potential for contemporary applications, particularly in the field of modern interior design. This research investigates the fabrication of MBCs for modern interior materials using agro-industrial wastes (bamboo sawdust and corn pericarp) and different fungal species. The study focuses on determining physical properties, including moisture content, shrinkage, density, water absorption, volumetric swelling, thermal degradation, and mechanical properties (bending, compression, impact, and tensile strength). The results indicate variations in moisture content and shrinkage based on fungal species and substrate types, with bamboo sawdust exhibiting lower shrinkage. The obtained density values range from 212.31 to 282.09 kg/m3, comparable to traditional materials, suggesting MBCs potential in diverse fields, especially as modern interior elements. Water absorption and volumetric swelling demonstrate the influence of substrate and fungal species, although they do not significantly impact the characteristics of interior decoration materials. Thermal degradation analysis aligns with established patterns, showcasing the suitability of MBCs for various applications. Scanning electron microscope observations reveal the morphological features of MBCs, emphasizing the role of fungal mycelia in binding substrate particles. Mechanical properties exhibit variations in bending, compression, impact, and tensile strength, with MBCs demonstrating compatibility with traditional materials used in interior elements. Those produced from L. sajor-caju and G. fornicatum show especially promising characteristics in this context. Particularly noteworthy are their superior compression and impact strength, surpassing values observed in certain synthetic foams multiple times. Moreover, this study reveals the biodegradability of MBCs, reaching standards for environmentally friendly materials. A comprehensive comparison with traditional materials further supports the potential of MBCs in sustainable material. Challenges in standardization, production scalability, and market adoption are identified, emphasizing the need for ongoing research, material engineering advancements, and biotechnological innovations. These efforts aim to enhance MBC properties, promoting sustainability in modern interior applications, while also facilitating their expansion into mass production within the innovative construction materials market.

Schlagwörter

Stichwörter der Autor:innen

SDGs8 and 9agro-industrial wasteseco-sustainabilitygreen materialsmycelium technology

Autor:innen und Institutionen

  • Office of Research Administration, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Department of Biology, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Faculty of Architecture, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Center of Excellence in Microbial Diversity and Sustainable Utilization, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Northfield Mount Hermon School, Mount Hermon, MA 01354, USA.

ORCID-Profile: Nakarin Suwannarach, Jaturong Kumla, Thana Teeraphantuvat, Tanut Waroonkun

Förderung

  • The Fundamental Fund 2023, Chiang Mai University, Chiang Mai, Thailand
  • Fundamental Fund 2023
  • Chiang Mai University, and partially supported by Modern Frame. Co., Ltd.

Zitieren

APA

Aiduang, W., Jatuwong, K., Jinanukul, P., Suwannarach, N., Kumla, J., Thamjaree, W., Teeraphantuvat, T., Waroonkun, T., Oranratmanee, R., & Lumyong, S. (2024). Sustainable Innovation: Fabrication and Characterization of Mycelium-Based Green Composites for Modern Interior Materials Using Agro-Industrial Wastes and Different Species of Fungi. Polymers, 16(4), 550. https://doi.org/10.3390/polym16040550

Vancouver

Aiduang W, Jatuwong K, Jinanukul P, Suwannarach N, Kumla J, Thamjaree W, et al. Sustainable Innovation: Fabrication and Characterization of Mycelium-Based Green Composites for Modern Interior Materials Using Agro-Industrial Wastes and Different Species of Fungi. Polymers. 2024;16(4):550. doi:10.3390/polym16040550

BibTeX
@article{Aiduang2024,
  author = {Aiduang, Worawoot and Jatuwong, Kritsana and Jinanukul, Praween and Suwannarach, Nakarin and Kumla, Jaturong and Thamjaree, Wandee and Teeraphantuvat, Thana and Waroonkun, Tanut and Oranratmanee, Rawiwan and Lumyong, Saisamorn},
  title = {Sustainable Innovation: Fabrication and Characterization of Mycelium-Based Green Composites for Modern Interior Materials Using Agro-Industrial Wastes and Different Species of Fungi},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {4},
  pages = {550},
  doi = {10.3390/polym16040550}
}
Kostenlos starten →