EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nanocomposites Based on Thermoplastic Acrylic Resin with the Addition of Chemically Modified Multi-Walled Carbon Nanotubes

Szymon Demski iD, Dariusz Brząkalski iD, Maciej Gubernat, Kamil Dydek iD, Paweł Czaja iD, Konrad Żochowski, Paulina Kozera iD, Zuzanna Krawczyk iD, Bogna Sztorch, Robert Edward Przekop iD, Michał Marczak, Hermann Ehrlich iD und 1 weitere

Polymers · 02.02.2024 · 16 (3) · 422

DOI: 10.3390/polym16030422 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 02.02.2024. Verfasst von Szymon Demski und 12 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Science and Engineering, Warsaw University of Technology, 141 Wołoska St., 02-507 Warsaw, Poland. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Centre for Research and Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main goal of this work was an improvement in the mechanical and electrical properties of acrylic resin-based nanocomposites filled with chemically modified carbon nanotubes. For this purpose, the surface functionalization of multi-walled carbon nanotubes (MWCNTs) was carried out by means of aryl groups grafting via the diazotization reaction with selected aniline derivatives, and then nanocomposites based on ELIUM® resin were fabricated. FT-IR analysis confirmed the effectiveness of the carried-out chemical surface modification of MWCNTs as new bands on FT-IR spectra appeared in the measurements. TEM observations showed that carbon nanotube fragmentation did not occur during the modifications. According to the results from Raman spectroscopy, the least defective carbon nanotube structure was obtained for aniline modification. Transmission light microscopy analysis showed that the neat MWCNTs agglomerate strongly, while the proposed modifications improved their dispersion significantly. Viscosity tests confirmed, that as the nanofiller concentration increases, the viscosity of the mixture increases. The mixture with the highest dispersion of nanoparticles exhibited the most viscous behaviour. Finally, an enhancement in impact resistance and electrical conductivity was obtained for nanocomposites containing modified MWCNTs.

Schlagwörter

Stichwörter der Autor:innen

acrylic resincarbon nanotubeschemical modificationelectrical propertiesmechanical propertiesnanocomposites

Autor:innen und Institutionen

  • Faculty of Materials Science and Engineering, Warsaw University of Technology, 141 Wołoska St., 02-507 Warsaw, Poland.
  • Centre for Advanced Technologies, Adam Mickiewicz University in Poznań, 10 Uniwersytetu Poznańskiego St., 61-614 Poznań, Poland.
  • Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Cracow, Poland.
  • The Aleksander Krupkowski Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 25 Reymonta St., 30-059 Kraków, Poland.
  • Institute of Materials, Ecole Polytechnique Fédérale de Lausanne, Station 12, CH-1015 Lausanne, Switzerland.
  • Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, 85 Narbutta St., 02-524 Warsaw, Poland.

ORCID-Profile: Szymon Demski, Dariusz Brząkalski, Kamil Dydek, Paweł Czaja, Paulina Kozera, Zuzanna Krawczyk, Robert Edward Przekop, Hermann Ehrlich, Anna Boczkowska

Förderung

  • The National Centre for Research and Development

Zitieren

APA

Demski, S., Brząkalski, D., Gubernat, M., Dydek, K., Czaja, P., Żochowski, K., Kozera, P., Krawczyk, Z., Sztorch, B., Przekop, R. E., Marczak, M., Ehrlich, H., & Boczkowska, A. (2024). Nanocomposites Based on Thermoplastic Acrylic Resin with the Addition of Chemically Modified Multi-Walled Carbon Nanotubes. Polymers, 16(3), 422. https://doi.org/10.3390/polym16030422

Vancouver

Demski S, Brząkalski D, Gubernat M, Dydek K, Czaja P, Żochowski K, et al. Nanocomposites Based on Thermoplastic Acrylic Resin with the Addition of Chemically Modified Multi-Walled Carbon Nanotubes. Polymers. 2024;16(3):422. doi:10.3390/polym16030422

BibTeX
@article{Demski2024,
  author = {Demski, Szymon and Brząkalski, Dariusz and Gubernat, Maciej and Dydek, Kamil and Czaja, Paweł and Żochowski, Konrad and Kozera, Paulina and Krawczyk, Zuzanna and Sztorch, Bogna and Przekop, Robert Edward and Marczak, Michał and Ehrlich, Hermann and Boczkowska, Anna},
  title = {Nanocomposites Based on Thermoplastic Acrylic Resin with the Addition of Chemically Modified Multi-Walled Carbon Nanotubes},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {3},
  pages = {422},
  doi = {10.3390/polym16030422}
}
Kostenlos starten →