EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Manipulating Microbial Cell Morphology for the Sustainable Production of Biopolymers

Vipin C Kalia iD, Sanjay K S Patel iD, Kugalur K Karthikeyan, Marimuthu Jeya, In-Won Kim, Jung-Kul Lee iD

Polymers · 01.02.2024 · 16 (3) · 410

DOI: 10.3390/polym16030410 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 01.02.2024. Verfasst von Vipin C Kalia und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, Seoul 05029, Republic of Korea. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 109 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation, Basic Science Research Program through the National Research Foundation of Korea (NRF), Ministry of Science, ICT, and Future Planning.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The total rate of plastic production is anticipated to surpass 1.1 billion tons per year by 2050. Plastic waste is non-biodegradable and accumulates in natural ecosystems. In 2020, the total amount of plastic waste was estimated to be 367 million metric tons, leading to unmanageable waste disposal and environmental pollution issues. Plastics are produced from petroleum and natural gases. Given the limited fossil fuel reserves and the need to circumvent pollution problems, the focus has shifted to biodegradable biopolymers, such as polyhydroxyalkanoates (PHAs), polylactic acid, and polycaprolactone. PHAs are gaining importance because diverse bacteria can produce them as intracellular inclusion bodies using biowastes as feed. A critical component in PHA production is the downstream processing procedures of recovery and purification. In this review, different bioengineering approaches targeted at modifying the cell morphology and synchronizing cell lysis with the biosynthetic cycle are presented for product separation and extraction. Complementing genetic engineering strategies with conventional downstream processes, these approaches are expected to produce PHA sustainably.

Schlagwörter

Stichwörter der Autor:innen

bacteriabiopolymersbiotechnologycell divisioncell morphologypolyhydroxyalkanoates

Autor:innen und Institutionen

  • Department of Chemical Engineering, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, Seoul 05029, Republic of Korea.
  • Marine Biotechnology Division, National Institute of Ocean Technology, Chennai 600100, India.

ORCID-Profile: Vipin C Kalia, Sanjay K S Patel, Jung-Kul Lee

Förderung

  • National Research Foundation
  • Basic Science Research Program through the National Research Foundation of Korea (NRF)
  • Ministry of Science, ICT, and Future Planning

Zitieren

APA

Kalia, V. C., Patel, S. K. S., Karthikeyan, K. K., Jeya, M., Kim, I. W., & Lee, J. K. (2024). Manipulating Microbial Cell Morphology for the Sustainable Production of Biopolymers. Polymers, 16(3), 410. https://doi.org/10.3390/polym16030410

Vancouver

Kalia VC, Patel SKS, Karthikeyan KK, Jeya M, Kim IW, Lee JK. Manipulating Microbial Cell Morphology for the Sustainable Production of Biopolymers. Polymers. 2024;16(3):410. doi:10.3390/polym16030410

BibTeX
@article{Kalia2024,
  author = {Kalia, Vipin C and Patel, Sanjay K S and Karthikeyan, Kugalur K and Jeya, Marimuthu and Kim, In-Won and Lee, Jung-Kul},
  title = {Manipulating Microbial Cell Morphology for the Sustainable Production of Biopolymers},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {3},
  pages = {410},
  doi = {10.3390/polym16030410}
}
Kostenlos starten →