EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Materials from Organosolv Fibers and Lignin, Kraft Fibers, and Their Blends

Jost Ruwoldt iD, Gary Chinga-Carrasco iD, Mihaela Tanase-Opedal

Polymers · 30.01.2024 · 16 (3) · 377

DOI: 10.3390/polym16030377 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.01.2024. Verfasst von Jost Ruwoldt und 2 weiteren Autor:innen. Beteiligte Einrichtung: RISE PFI AS, Høgskoleringen 6B, 7491 Trondheim, Norway. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Research Council of Norway, Research Council of Norway via the FME Centre for environmentally friendly energy research Bio4Fuel.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study was to investigate new materials from organosolv fibers, organosolv lignin, kraft fibers, and their blends. The organosolv fibers showed reprecipitated lignin on the surface, a comparably low fiber length of 0.565 mm on average, and a high fines content of 82.3%. Handsheets were formed and thermopressed at 175 °C and 50 MPa, yielding dense materials (1050–1100 kg/m3) with properties different to that of regular paper products. The thermopressing of organosolv fibers alone produced materials with similar or better tensile strength (σb = 18.6 MPa) and stiffness (E* = 2.8 GPa) to the softwood Kraft reference pulp (σb = 14.8 MPa, E* = 1.8 GPa). The surface morphology was also smoother with fewer cavities. As a result, the thermopressed organosolv fibers exhibited higher hydrophobicity (contact angle > 95°) and had the lowest overall water uptake. Combinations of Kraft fibers with organosolv fibers or organosolv lignin showed reduced wetting and a higher density than the Kraft fibers alone. Furthermore, the addition of organosolv lignin to Kraft fibers greatly improved tensile stiffness and strength (σb = 23.8 MPa, E* = 10.5 GPa), likely due to the lignin acting as a binder to the fiber network. In conclusion, new thermopressed materials were developed and tested, which show promising potential for sustainable fiber materials with improved water resistance.

Schlagwörter

Stichwörter der Autor:innen

Kraft pulpadded-lignin thermoformed pulpsgreen materialsmolded pulporganosolv fibersthermoforming

Autor:innen und Institutionen

  • RISE PFI AS, Høgskoleringen 6B, 7491 Trondheim, Norway.

ORCID-Profile: Jost Ruwoldt, Gary Chinga-Carrasco

Förderung

  • The Research Council of Norway
  • Research Council of Norway via the FME Centre for environmentally friendly energy research Bio4Fuel

Zitieren

APA

Ruwoldt, J., Chinga-Carrasco, G., & Tanase-Opedal, M. (2024). Sustainable Materials from Organosolv Fibers and Lignin, Kraft Fibers, and Their Blends. Polymers, 16(3), 377. https://doi.org/10.3390/polym16030377

Vancouver

Ruwoldt J, Chinga-Carrasco G, Tanase-Opedal M. Sustainable Materials from Organosolv Fibers and Lignin, Kraft Fibers, and Their Blends. Polymers. 2024;16(3):377. doi:10.3390/polym16030377

BibTeX
@article{Ruwoldt2024,
  author = {Ruwoldt, Jost and Chinga-Carrasco, Gary and Tanase-Opedal, Mihaela},
  title = {Sustainable Materials from Organosolv Fibers and Lignin, Kraft Fibers, and Their Blends},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {3},
  pages = {377},
  doi = {10.3390/polym16030377}
}
Kostenlos starten →