Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films
Polymers · 25.01.2024 · 16 (3) · 326
DOI: 10.3390/polym16030326 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 25.01.2024. Verfasst von Xiaoyan He und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Material Science and Engineering, Taizhou Institute of Zhejiang University, Taizhou 318000, China. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Postdoctoral fellows of Taizhou, Taizhou Municipal Science and Technology Program, the National Key Research and Development Program China.
Abstract (Originalsprache)
Starches plasticized with glycerol/citric acid/stearic acid and tributyl 2-acetylcitrate (ATBC), respectively, were processed with poly (butylene adipate-Co-terephthalate (PBAT) via extrusion and a film-blown process. All the composite films were determined for morphology, mechanical, thermal stability, crystalline, and optical properties. Results show that the most improved morphology was in the 30% glycerol plasticized PBAT/thermoplastic starch (TPS) composite films, characterized by the smallest and narrowest distribution of TPS particle sizes and a more uniform dispersion of TPS particles. However, the water absorption of PBAT/TPS composite films plasticized with glycerol surpassed that observed with ATBC as a plasticizer. Mechanical properties indicated insufficient plasticization of the starch crystal structure when using 10% ATBC, 20% ATBC, and 20% glycerol as plasticizers, leading to poor compatibility between PBAT and TPS. This resulted in stress concentration points under external forces, adversely affecting the mechanical properties of the composites. All PBAT/TPS composite films exhibited a negative impact on the initial thermal decomposition temperature compared to PBAT. Additionally, the haze value of PBAT/TPS composite films exceeded 96%, while pure PBAT had a haze value of 47.42%. Films plasticized with 10% ATBC, 20% ATBC, and 20% glycerol displayed lower transmittance values in the visible light region. The increased transmittance of films plasticized with 30% glycerol further demonstrated their superior plasticizing effect compared to other PBAT/TPS composite films. This study provides a simple and feasible method for preparing low-cost PBAT composites, and their extensions are expected to further replace general-purpose plastics in daily applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Material Science and Engineering, Taizhou Institute of Zhejiang University, Taizhou 318000, China.
- Sanmen Megatron Tech. Co., Ltd., Taizhou 318000, China.
- Center for Biotechnology and Biomedical Engineering, Yiwu Research Institute of Fudan University, Yiwu 322000, China.
- Academy for Engineering and Applied Technology, Fudan University, Shanghai 200433, China.
ORCID-Profile: Xiaoyan He, Congcong Li, Ran Huang
Förderung
- the Postdoctoral fellows of Taizhou
- Taizhou Municipal Science and Technology Program
- the National Key Research and Development Program China
- the Medical Engineering Fund of Fudan University
- Guangdong Provincial Science and Technology Program
- the RIZT Industrial Program
Zitieren
APA
He, X., Zhang, F., Li, C., Ding, W., Jin, Y., Tang, L., & Huang, R. (2024). Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films. Polymers, 16(3), 326. https://doi.org/10.3390/polym16030326
Vancouver
He X, Zhang F, Li C, Ding W, Jin Y, Tang L, et al. Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films. Polymers. 2024;16(3):326. doi:10.3390/polym16030326
BibTeX
@article{He2024,
author = {He, Xiaoyan and Zhang, Fuhong and Li, Congcong and Ding, Weiwei and Jin, Yuanyuan and Tang, Lisheng and Huang, Ran},
title = {Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films},
journal = {Polymers},
year = {2024},
volume = {16},
number = {3},
pages = {326},
doi = {10.3390/polym16030326}
}
EUVIMED