EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mouldable Conductive Plastic with Optimised Mechanical Properties

Arfat Anis iD, Abdullah Alhamidi, Zahir Bashir, Mohammad Asif Alam, Saeed M Al-Zahrani

Polymers · 23.01.2024 · 16 (3) · 311

DOI: 10.3390/polym16030311 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.01.2024. Verfasst von Arfat Anis und 4 weiteren Autor:innen. Beteiligte Einrichtung: SABIC Polymer Research Center (SPRC), Chemical Engineering Department, King Saud University, Riyadh 11421, Saudi Arabia. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia, Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates making an injection mouldable conductive plastic formulation that aims for conductivity into the electromagnetic interference (EMI) shielding range, with good mechanical properties (i.e., stiffness, strength, and impact resistance). While conductivity in the range (electrostatic charge dissipation) and EMI shielding have been attained by incorporating conductive fillers such as carbon black, metals powders, and new materials, such as carbon nanotubes (CNTs), this often occurs with a drop in tensile strength, elongation-to-break resistance, and impact resistance. It is most often the case that the incorporation of high modulus fillers leads to an increase in modulus but a drop in strength and impact resistance. In this work, we have used short carbon fibres as the conductive filler and selected a 50/50 PBT/rPET (recycled PET) for the plastic matrix. Carbon fibres are cheaper than CNTs and graphenes. The PBT/rPET has low melt viscosity and crystallises sufficiently fast during injection moulding. To improve impact resistance, a styrene-ethylene-butadiene-styrene (SEBS) rubber toughening agent was added to the plastic. The PBT/rPET had very low-impact resistance and the SEBS provided rubber toughening to it; however, the rubber caused a drop in the tensile modulus and strength. The short carbon fibre restored the modulus and strength, which reached higher value than the PBT/rPET while providing the conductivity. Scanning electron microscope pictures showed quite good bonding of the current filler (CF) to the PBT/rPET. An injection mouldable conductive plastic with high conductivity and raised modulus, strength, and impact resistance could be made.

Schlagwörter

Stichwörter der Autor:innen

carbon fibreconductive plasticmechanical propertiespolymer blendrecycled PETreinforced polymer composite

Autor:innen und Institutionen

  • SABIC Polymer Research Center (SPRC), Chemical Engineering Department, King Saud University, Riyadh 11421, Saudi Arabia.
  • Catenated Carbon Consultancy Ltd., 192 Wake Green Road, Birmingham B13 9QE, UK.
  • Center of Excellence for Research in Engineering Materials (CEREM), King Saud University, Riyadh 11421, Saudi Arabia.

ORCID-Profile: Arfat Anis

Förderung

  • Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia
  • Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia

Zitieren

APA

Anis, A., Alhamidi, A., Bashir, Z., Alam, M. A., & Al-Zahrani, S. M. (2024). Mouldable Conductive Plastic with Optimised Mechanical Properties. Polymers, 16(3), 311. https://doi.org/10.3390/polym16030311

Vancouver

Anis A, Alhamidi A, Bashir Z, Alam MA, Al-Zahrani SM. Mouldable Conductive Plastic with Optimised Mechanical Properties. Polymers. 2024;16(3):311. doi:10.3390/polym16030311

BibTeX
@article{Anis2024,
  author = {Anis, Arfat and Alhamidi, Abdullah and Bashir, Zahir and Alam, Mohammad Asif and Al-Zahrani, Saeed M},
  title = {Mouldable Conductive Plastic with Optimised Mechanical Properties},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {3},
  pages = {311},
  doi = {10.3390/polym16030311}
}
Kostenlos starten →