Facile Preparation of Polyacrylonitrile-Based Activated Carbon Fiber Felts for Effective Adsorption of Dipropyl Sulfide
Polymers · 16.01.2024 · 16 (2) · 252
DOI: 10.3390/polym16020252 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 16.01.2024. Verfasst von Tianhao Zhang und 8 weiteren Autor:innen. Beteiligte Einrichtung: National & Local Joint Engineering Research Center of Technical Fiber Composites for Safety and Protection, School of Textile and Clothing, Nantong U…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Postgraduate Research & Practice Innovation Program of Jiangsu Province, the Science and Technology Project of Nantong City, the Natural Science Foundation of Jiangsu Province.
Abstract (Originalsprache)
Activated carbon fibers (ACFs) derived from various polymeric fibers with the characteristics of a high specific surface area, developed pore structure, and good flexibility are promising for the new generation of chemical protection clothing. In this paper, a polyacrylonitrile-based ACF felt was prepared via the process of liquid phase pre-oxidation, along with a one-step carbonization and chemical activation method. The obtained ACF felt exhibited a large specific surface area of 2219.48 m2/g and pore volume of 1.168 cm3/g, as well as abundant polar groups on the surface. Owing to the developed pore structure and elaborated surface chemical property, the ACF felt possessed an intriguing adsorption performance for a chemical warfare agent simulant dipropyl sulfide (DPS), with the highest adsorption capacity being 202.38 mg/g. The effects of the initial concentration of DPS and temperature on the adsorption performance of ACF felt were investigated. Meanwhile, a plausible adsorption mechanism was proposed based on the kinetic analysis and fitting of different adsorption isotherm models. The results demonstrated that the adsorption process of DPS onto ACF felt could be well fitted with a pseudo-second-order equation, indicating a synergistic effect of chemical adsorption and physical adsorption. We anticipate that this work could be helpful to the design and development of advanced ACF felts for the application of breathable chemical protection clothing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National & Local Joint Engineering Research Center of Technical Fiber Composites for Safety and Protection, School of Textile and Clothing, Nantong University, Nantong 226019, China.
- Jiangsu Sutong Carbon Fiber Co., Ltd., Nantong 226005, China.
ORCID-Profile: Tianhao Zhang
Förderung
- Postgraduate Research & Practice Innovation Program of Jiangsu Province
- the Science and Technology Project of Nantong City
- the Natural Science Foundation of Jiangsu Province
- National Natural Science Foundation of China
- Postgraduate Research & Practice Innovation Program of Jiangsu Province
- Science and Technology Project of Nantong City
- Natural Science Foundation of Jiangsu Province
Zitieren
APA
Zhang, T., He, Y., Hu, S., Ge, J., Chen, T., Shan, H., Ji, T., Yu, D., & Liu, Q. (2024). Facile Preparation of Polyacrylonitrile-Based Activated Carbon Fiber Felts for Effective Adsorption of Dipropyl Sulfide. Polymers, 16(2), 252. https://doi.org/10.3390/polym16020252
Vancouver
Zhang T, He Y, Hu S, Ge J, Chen T, Shan H, et al. Facile Preparation of Polyacrylonitrile-Based Activated Carbon Fiber Felts for Effective Adsorption of Dipropyl Sulfide. Polymers. 2024;16(2):252. doi:10.3390/polym16020252
BibTeX
@article{Zhang2024,
author = {Zhang, Tianhao and He, Yafang and Hu, Shiqi and Ge, Jianlong and Chen, Tianye and Shan, Haoru and Ji, Tao and Yu, Decheng and Liu, Qixia},
title = {Facile Preparation of Polyacrylonitrile-Based Activated Carbon Fiber Felts for Effective Adsorption of Dipropyl Sulfide},
journal = {Polymers},
year = {2024},
volume = {16},
number = {2},
pages = {252},
doi = {10.3390/polym16020252}
}
EUVIMED