EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Oil Addition on Physicochemical Properties and In Vitro Digestibility of Extruded Pineapple Stem Starch

Juthamath Nisitthichai, Phimraphat Wannaphruek, Jiratthitikan Sriprablom iD, Manop Suphantharika iD, Siwaporn Meejoo Smith iD, Taweechai Amornsakchai iD, Rungtiwa Wongsagonsup iD

Polymers · 11.01.2024 · 16 (2) · 210

DOI: 10.3390/polym16020210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.01.2024. Verfasst von Juthamath Nisitthichai und 6 weiteren Autor:innen. Beteiligte Einrichtung: Division of Food Technology, Kanchanaburi Campus, Mahidol University, Kanchanaburi 71150, Thailand. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mahidol University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of palm oil (PO) and coconut oil (CO) additions on the physicochemical properties and in vitro starch digestibility of extruded pineapple stem starch (PSS) were studied. The native PSS was adjusted to 15% moisture and blended with PO or CO in amounts of 5 and 10% (w/w of starch), while the control sample without added oil was adjusted to 25% moisture before being extruded with a twin-screw extruder at a maximum barrel temperature of 140 °C. Due to the lubricating effect, the added oils reduced the expansion ratio of the extrudates, which led to an increase in cell wall thickness, bulk density, hardness, and water adsorption index, but to a reduction in the water solubility index, especially with 10% oils. PO had a greater impact on the physicochemical changes in the extrudates than CO. Surprisingly, no amylose-lipid complex was observed in the extrudates with added oil, as shown by XRD, DSC, and FTIR results. The phenolic compounds contained in PSS remained in all extrudates, which could affect the formation of the amylose-lipid complex during extrusion. The addition of 5% oil had no effect on the digestibility of the starch compared to the control extrudates, while the 10% oils, both PO and CO, reduced the rapidly digestible starch content but significantly increased the resistant starch content of the extruded PSS.

Schlagwörter

Stichwörter der Autor:innen

extrusionoil additionphysicochemical propertiespineapple stem starchstarch digestibility

Autor:innen und Institutionen

  • Division of Food Technology, Kanchanaburi Campus, Mahidol University, Kanchanaburi 71150, Thailand.
  • Institute of Nutrition, Mahidol University, Nakhon Pathom 73170, Thailand.
  • Department of Biotechnology, Faculty of Science, Mahidol University, Rama 6 Road, Bangkok 10400, Thailand.
  • Center of Sustainable Energy and Green Materials, Faculty of Science, Mahidol University, Nakhon Pathom 73170, Thailand.
  • Department of Chemistry, Faculty of Science, Mahidol University, Nakhon Pathom 73170, Thailand.

ORCID-Profile: Jiratthitikan Sriprablom, Manop Suphantharika, Siwaporn Meejoo Smith, Taweechai Amornsakchai, Rungtiwa Wongsagonsup

Förderung

  • Mahidol University

Zitieren

APA

Nisitthichai, J., Wannaphruek, P., Sriprablom, J., Suphantharika, M., Smith, S. M., Amornsakchai, T., & Wongsagonsup, R. (2024). Impact of Oil Addition on Physicochemical Properties and In Vitro Digestibility of Extruded Pineapple Stem Starch. Polymers, 16(2), 210. https://doi.org/10.3390/polym16020210

Vancouver

Nisitthichai J, Wannaphruek P, Sriprablom J, Suphantharika M, Smith SM, Amornsakchai T, et al. Impact of Oil Addition on Physicochemical Properties and In Vitro Digestibility of Extruded Pineapple Stem Starch. Polymers. 2024;16(2):210. doi:10.3390/polym16020210

BibTeX
@article{Nisitthichai2024,
  author = {Nisitthichai, Juthamath and Wannaphruek, Phimraphat and Sriprablom, Jiratthitikan and Suphantharika, Manop and Smith, Siwaporn Meejoo and Amornsakchai, Taweechai and Wongsagonsup, Rungtiwa},
  title = {Impact of Oil Addition on Physicochemical Properties and In Vitro Digestibility of Extruded Pineapple Stem Starch},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {2},
  pages = {210},
  doi = {10.3390/polym16020210}
}
Kostenlos starten →