EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Recent Trends in Polymeric Foams and Porous Structures for Electromagnetic Interference Shielding Applications

Marcelo Antunes iD

Polymers · 09.01.2024 · 16 (2) · 195

DOI: 10.3390/polym16020195 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 09.01.2024. Verfasst von Marcelo Antunes. Beteiligte Einrichtung: Department of Materials Science and Engineering, Poly2 Group, Technical University of Catalonia (UPC BarcelonaTech), ESEIAAT, C/Colom 11, 08222 Terra…. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia e Innovación, Spanish Ministry of Science and Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer-based (nano)composite foams containing conductive (nano)fillers limit electromagnetic interference (EMI) pollution, and have been shown to act as good shielding materials in electronic devices. However, due to their high (micro)structural complexity, there is still a great deal to learn about the shielding mechanisms in these materials; understanding this is necessary to study the relationship between the properties of the microstructure and the porous structure, especially their EMI shielding efficiency (EMI SE). Targeting and controlling the electrical conductivity through a controlled distribution of conductive nanofillers are two of the main objectives when combining foaming with the addition of nanofillers; to achieve this, both single or combined nanofillers (nanohybrids) are used (as there is a direct relationship between electrical conductivity and EMI SE), as are the main shielding mechanisms working on the foams (which are expected to be absorption-dominated). The present review considers the most significant developments over the last three years concerning polymer-based foams containing conductive nanofillers, especially carbon-based nanofillers, as well as other porous structures created using new technologies such as 3D printing for EMI shielding applications. It starts by detailing the microcellular foaming strategy, which develops polymer foams with enhanced EMI shielding, and it particularly focuses on technologies using supercritical CO2 (sCO2). It also notes the use of polymer foams as templates to prepare carbon foams with high EMI shielding performances for high temperature applications, as well as a recent strategy which combines different functional (nano)fillers to create nanohybrids. This review also explains the control and selective distribution of the nanofillers, which favor an effective conductive network formation, which thus promotes the enhancement of the EMI SE. The recent use of computational approaches to tailor the EMI shielding properties are given, as are new possibilities for creating components with varied porous structures using the abovementioned materials and 3D printing. Finally, future perspectives are discussed.

Schlagwörter

Stichwörter der Autor:innen

3D printingEM wave absorptionEMI shieldingcarbon-based nanofillersmicrocellular foamsnanohybridspolymeric foamsporous structures

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Poly2 Group, Technical University of Catalonia (UPC BarcelonaTech), ESEIAAT, C/Colom 11, 08222 Terrassa, Spain.

ORCID-Profile: Marcelo Antunes

Förderung

  • Ministerio de Ciencia e Innovación
  • Spanish Ministry of Science and Innovation

Zitieren

APA

Antunes, M. (2024). Recent Trends in Polymeric Foams and Porous Structures for Electromagnetic Interference Shielding Applications. Polymers, 16(2), 195. https://doi.org/10.3390/polym16020195

Vancouver

Antunes M. Recent Trends in Polymeric Foams and Porous Structures for Electromagnetic Interference Shielding Applications. Polymers. 2024;16(2):195. doi:10.3390/polym16020195

BibTeX
@article{Antunes2024,
  author = {Antunes, Marcelo},
  title = {Recent Trends in Polymeric Foams and Porous Structures for Electromagnetic Interference Shielding Applications},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {2},
  pages = {195},
  doi = {10.3390/polym16020195}
}
Kostenlos starten →