EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of the Properties of Pullulan-Based Active Edible Coatings Implemented for Improving Sliced Cheese Shelf Life

Tamara Erceg iD, Olja Šovljanski iD, Ana Tomić iD, Milica Aćimović iD, Alena Stupar iD, Sebastian Baloš iD

Polymers · 07.01.2024 · 16 (2) · 178

DOI: 10.3390/polym16020178 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 07.01.2024. Verfasst von Tamara Erceg und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation, Republic Serbia, Provincial Secretariat for Higher Education and Scientific Research, Autonomous Province of Vojvodina, Republic of Serbia, Ministry of Science, Technological Development and Innovation, Republic of Serbia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of active edible coatings with improved mechanical and barrier properties is a huge challenge. In this study, active edible coatings for sliced cheese have been developed using pullulan (Pull) in combination with two different biopolymers, chitosan (CS) and gelatine (Gel), and a combination of hydrolats as a source of active compounds with antimicrobial effects. In comparison to the monolayer coating, the bilayer coating system demonstrates improved barrier and mechanical properties. A preliminary assessment of the antimicrobial effect of lemongrass and curry plant hydrolats has revealed that both hydrolats exhibited antimicrobial activity against the targeted bacterium Staphylococcus aureus, albeit at different levels. The obtained results suggest that a mixture of 1.56% lemongrass and 12.5% curry plant hydrolats yielded a lower fractional inhibitory concentration (FIC) value. Bilayer coating systems (Pull/CS and Pull/Gel) with an incorporated mixture of hydrolats have demonstrated effectiveness in both cases: artificial contamination before application of the coating system and after application of the coating system. In both contamination scenarios, the coating systems consistently effectively limited bacterial proliferation, indicating the antimicrobial effect of the hydrolat mixture in the coating layers. In the case of artificial contamination before applying the coating system, both coatings demonstrated antimicrobial effectiveness, but the formulation with chitosan had a biocide effect, while the other, with gelatine, had only a bacteriostatic effect in a long-term setting. In the second case, both Pull/CS and Pull/Gel coatings demonstrated effectiveness in inhibiting bacterial growth regardless of the moment of contamination of the sample; the Pull/CS coating showed slightly better antimicrobial activity, achieving complete elimination of bacteria earlier compared with the Pull/Gel coating system.

Schlagwörter

Stichwörter der Autor:innen

bilayer active edible coatingchitosangelatinhydrolatepullulansynergistic effect of antimicrobials

Autor:innen und Institutionen

  • Faculty of Technology Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia.
  • Institute of Field and Vegetable Crops Novi Sad, National Institute of the Republic of Serbia, 21000 Novi Sad, Serbia.
  • Institute of Food Technology Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia.
  • Faculty of Technical Science, University of Novi Sad, 21000 Novi Sad, Serbia.

ORCID-Profile: Tamara Erceg, Olja Šovljanski, Ana Tomić, Milica Aćimović, Alena Stupar, Sebastian Baloš

Förderung

  • Ministry of Science, Technological Development and Innovation, Republic Serbia
  • Provincial Secretariat for Higher Education and Scientific Research, Autonomous Province of Vojvodina, Republic of Serbia
  • Ministry of Science, Technological Development and Innovation, Republic of Serbia

Zitieren

APA

Erceg, T., Šovljanski, O., Tomić, A., Aćimović, M., Stupar, A., & Baloš, S. (2024). Comparison of the Properties of Pullulan-Based Active Edible Coatings Implemented for Improving Sliced Cheese Shelf Life. Polymers, 16(2), 178. https://doi.org/10.3390/polym16020178

Vancouver

Erceg T, Šovljanski O, Tomić A, Aćimović M, Stupar A, Baloš S. Comparison of the Properties of Pullulan-Based Active Edible Coatings Implemented for Improving Sliced Cheese Shelf Life. Polymers. 2024;16(2):178. doi:10.3390/polym16020178

BibTeX
@article{Erceg2024,
  author = {Erceg, Tamara and Šovljanski, Olja and Tomić, Ana and Aćimović, Milica and Stupar, Alena and Baloš, Sebastian},
  title = {Comparison of the Properties of Pullulan-Based Active Edible Coatings Implemented for Improving Sliced Cheese Shelf Life},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {2},
  pages = {178},
  doi = {10.3390/polym16020178}
}
Kostenlos starten →