EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simultaneous Optimization of Deacetylation Degree and Molar Mass of Chitosan from Shrimp Waste

Daniel Dumitru Dinculescu, Manuela Rossemary Apetroaei, Cristiana Luminița Gîjiu, Mirela Anton, Laura Enache, Verginica Schröder iD, Raluca Isopescu, Ileana Rău iD

Polymers · 06.01.2024 · 16 (2) · 170

DOI: 10.3390/polym16020170 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.01.2024. Verfasst von Daniel Dumitru Dinculescu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemical Engineering and Biotechnologies, National University of Science and Technology POLITEHNICA Bucharest, 011061 Bucharest, Romania. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Romanian Ministry of Education and Research, CNCS—UEFISCDI.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Shrimp waste is a valuable source for chitin extraction and consequently for chitosan preparation. In the process of obtaining chitosan, a determining step is the chitin deacetylation. The main characteristic of chitosan is the degree of deacetylation, which must be as high as possible. The molar mass is another important parameter that defines its utilizations, and according to these, high or low molar masses are required. The present study is an attempt to optimize the deacetylation step to obtain chitosan with a high degree of deacetylation and high or low molar mass. The study was carried out based on experimental data obtained in the frame of a central composite design where three working parameters were considered: NaOH concentration, liquid:solid ratio, and process duration. The regression models defined for the degree of deacetylation (DD) and for the mean molar mass (MM) of chitosan powders were used in the formulation of optimization problems. The objectives considered were simultaneous maximum DD and maximum/minimum MM for the final chitosan samples. For these purposes, multiobjective optimization problems were formulated and solved using genetic algorithms implemented in Matlab®. The multiple optimal solutions represented by trade-offs between the two objectives are presented for each case.

Schlagwörter

Stichwörter der Autor:innen

Pareto frontchitosandesign of experimentsmultiobjective optimizationshrimp waste

Autor:innen und Institutionen

  • Faculty of Chemical Engineering and Biotechnologies, National University of Science and Technology POLITEHNICA Bucharest, 011061 Bucharest, Romania.
  • Faculty of Navigation and Naval Management, Mircea cel Bătrân Naval Academy, 900218 Constanta, Romania.
  • Faculty of Pharmacy, Ovidius University of Constanta, 900470 Constanta, Romania.

ORCID-Profile: Verginica Schröder, Ileana Rău

Förderung

  • Romanian Ministry of Education and Research, CNCS—UEFISCDI

Zitieren

APA

Dinculescu, D. D., Apetroaei, M. R., Gîjiu, C. L., Anton, M., Enache, L., Schröder, V., Isopescu, R., & Rău, I. (2024). Simultaneous Optimization of Deacetylation Degree and Molar Mass of Chitosan from Shrimp Waste. Polymers, 16(2), 170. https://doi.org/10.3390/polym16020170

Vancouver

Dinculescu DD, Apetroaei MR, Gîjiu CL, Anton M, Enache L, Schröder V, et al. Simultaneous Optimization of Deacetylation Degree and Molar Mass of Chitosan from Shrimp Waste. Polymers. 2024;16(2):170. doi:10.3390/polym16020170

BibTeX
@article{Dinculescu2024,
  author = {Dinculescu, Daniel Dumitru and Apetroaei, Manuela Rossemary and Gîjiu, Cristiana Luminița and Anton, Mirela and Enache, Laura and Schröder, Verginica and Isopescu, Raluca and Rău, Ileana},
  title = {Simultaneous Optimization of Deacetylation Degree and Molar Mass of Chitosan from Shrimp Waste},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {2},
  pages = {170},
  doi = {10.3390/polym16020170}
}
Kostenlos starten →