EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The 3D Printing of Novel Honeycomb–Hollow Pyramid Sandwich Structures for Microwave and Mechanical Energy Absorption

Quan Li, Zhicheng Wang, Xueyang Wang, Yang Wang, Jian Yang

Polymers · 15.12.2023 · 15 (24) · 4719

DOI: 10.3390/polym15244719 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.12.2023. Verfasst von Quan Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 211816, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Honeycomb sandwich (HS) structures are important lightweight and load-bearing materials used in the aerospace industry. In this study, novel honeycomb–hollow pyramid sandwich (HPS) structures were manufactured with the help of fused deposition modeling techniques using PLA and PLA/CNT filaments. The microwave and mechanical energy absorption properties of the HPS structures with different geometry parameters were studied. Compared with the HS structure, the HPS structure enhanced both microwave absorption and mechanical properties. The HPS structures possessed both broadband and wide-angle microwave absorption characteristics. Their reflection loss at 8–18 GHz for incident angles of up to 45° was less than −10 dB. As the thickness of the hollow pyramid increased from 1.00 mm to 5.00 mm, the compressive strength of the HPS structure increased from 4.8 MPa to 12.5 MPa, while mechanical energy absorption per volume increased from 2639 KJ/m3 to 5598 KJ/m3. The microwave absorption and compressive behaviors of the HPS structures were studied.

Schlagwörter

Stichwörter der Autor:innen

PLA/CNThoneycomb–hollow pyramid metastructuremechanical energy absorptionmicrowave absorption

Autor:innen und Institutionen

  • Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 211816, China.
  • College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, Q., Wang, Z., Wang, X., Wang, Y., & Yang, J. (2023). The 3D Printing of Novel Honeycomb–Hollow Pyramid Sandwich Structures for Microwave and Mechanical Energy Absorption. Polymers, 15(24), 4719. https://doi.org/10.3390/polym15244719

Vancouver

Li Q, Wang Z, Wang X, Wang Y, Yang J. The 3D Printing of Novel Honeycomb–Hollow Pyramid Sandwich Structures for Microwave and Mechanical Energy Absorption. Polymers. 2023;15(24):4719. doi:10.3390/polym15244719

BibTeX
@article{Li2023,
  author = {Li, Quan and Wang, Zhicheng and Wang, Xueyang and Wang, Yang and Yang, Jian},
  title = {The 3D Printing of Novel Honeycomb–Hollow Pyramid Sandwich Structures for Microwave and Mechanical Energy Absorption},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {24},
  pages = {4719},
  doi = {10.3390/polym15244719}
}
Kostenlos starten →