EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of an Electroactive and Thermo-Reversible Diels–Alder Epoxy Nanocomposite Doped with Carbon Nanotubes

Isaac Lorero iD, Álvaro Rodríguez, Mónica Campo iD, Silvia G Prolongo iD

Polymers · 15.12.2023 · 15 (24) · 4715

DOI: 10.3390/polym15244715 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.12.2023. Verfasst von Isaac Lorero und 3 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science and Engineering Area, Rey Juan Carlos University, C/Tulipán s/n, 28933 Móstoles, Madrid, Spain. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación, Agencia Estatal de Investigación of the Spanish Government, Rey Juan Carlos University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The manufacturing of Diels–Alder (D-A) crosslinked epoxy nanocomposites is an emerging field with several challenges to overcome: the synthesis is complex due to side reactions, the mechanical properties are hindered by the brittleness of these bonds, and the content of carbon nanotubes (CNT) added to achieve electroactivity is much higher than the percolation thresholds of other conventional resins. In this work, we develop nanocomposites with different D-A crosslinking ratios (0, 0.6, and 1.0) and CNT contents (0.1, 0.3, 0.5, 0.7, and 0.9 wt.%), achieving a simplified route and avoiding the use of solvents and side reactions by selecting a two-step curing method (100 °C-6 h + 60 °C-12 h) that generates the thermo-reversible resins. These reversible nanocomposites show ohmic behavior and effective Joule heating, reaching the dissociation temperatures of the D-A bonds. The fully reversible nanocomposites (ratio 1.0) present more homogeneous CNT dispersion compared to the partially reversible nanocomposites (ratio 0.6), showing higher electrical conductivity, as well as higher brittleness. For this study, the nanocomposite with a partially reversible matrix (ratio 0.6) doped with 0.7 CNT wt.% was selected to allow us to study its new smart functionalities and performance due to its reversible network by analyzing self-healing and thermoforming.

Schlagwörter

Stichwörter der Autor:innen

CANDiels–Alder thermosetelectroactive polymernanocompositesshape memory

Autor:innen und Institutionen

  • Materials Science and Engineering Area, Rey Juan Carlos University, C/Tulipán s/n, 28933 Móstoles, Madrid, Spain.
  • Instituto de Tecnologías Para la Sostenibilidad, Rey Juan Carlos University, C/Tulipán s/n, 28933 Móstoles, Madrid, Spain.

ORCID-Profile: Isaac Lorero, Mónica Campo, Silvia G Prolongo

Förderung

  • Agencia Estatal de Investigación
  • Agencia Estatal de Investigación of the Spanish Government
  • Rey Juan Carlos University

Zitieren

APA

Lorero, I., Rodríguez, Á., Campo, M., & Prolongo, S. G. (2023). Development of an Electroactive and Thermo-Reversible Diels–Alder Epoxy Nanocomposite Doped with Carbon Nanotubes. Polymers, 15(24), 4715. https://doi.org/10.3390/polym15244715

Vancouver

Lorero I, Rodríguez Á, Campo M, Prolongo SG. Development of an Electroactive and Thermo-Reversible Diels–Alder Epoxy Nanocomposite Doped with Carbon Nanotubes. Polymers. 2023;15(24):4715. doi:10.3390/polym15244715

BibTeX
@article{Lorero2023,
  author = {Lorero, Isaac and Rodríguez, Álvaro and Campo, Mónica and Prolongo, Silvia G},
  title = {Development of an Electroactive and Thermo-Reversible Diels–Alder Epoxy Nanocomposite Doped with Carbon Nanotubes},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {24},
  pages = {4715},
  doi = {10.3390/polym15244715}
}
Kostenlos starten →