Recyclability of Post-Consumer Polystyrene at Pilot Scale: Comparison of Mechanical and Solvent-Based Recycling Approaches
Polymers · 15.12.2023 · 15 (24) · 4714
DOI: 10.3390/polym15244714 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.12.2023. Verfasst von Jean-Mathieu Pin und 3 weiteren Autor:innen. Beteiligte Einrichtung: Polystyvert Inc., 9350 Rue de l'Innovation, Anjou, QC H1J 2X9, Canada. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council, UBC Materials & Manufacturing Research Institute (MMRI) National Circular Economy Seed Funding Award program 2021-2022.
Abstract (Originalsprache)
Solvent-based and mechanical recycling technology approaches were compared with respect to each process’s decontamination efficiency. Herein, post-consumer polystyrene (PS) feedstock was recycled by both technologies, yielding recycled PS resins (rPS). The process feedstock was subjected to four recycling cycles in succession to assess the technology perennity. The physico-chemical and mechanical properties of the rPS were then evaluated to discern the advantages and drawbacks of each recycling approach. The molecular weight of the mechanically recycled resin was found to decrease by 30% over the reprocessing cycles. In contrast, the solvent-base recycling technology yielded a similar molecular weight regarding the feedstock. This consistency in the rPS product is critical for consumer applications. Further qualitative and quantitative analyses on residual organic compounds and inorganic and particulate contaminants were investigated. It was found that the solvent-based technology is very efficient for purifying deeply contaminated feedstock in comparison to mechanical recycling, which is limited to well-cleaned and niche feedstocks.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Polystyvert Inc., 9350 Rue de l'Innovation, Anjou, QC H1J 2X9, Canada.
- Multifunctional Composites Manufacturing Laboratory (MCML), Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, ON M5S 3G8, Canada.
ORCID-Profile: Patrick C Lee
Förderung
- Natural Sciences and Engineering Research Council
- UBC Materials & Manufacturing Research Institute (MMRI) National Circular Economy Seed Funding Award program 2021-2022
Zitieren
APA
Pin, J. M., Soltani, I., Negrier, K., & Lee, P. C. (2023). Recyclability of Post-Consumer Polystyrene at Pilot Scale: Comparison of Mechanical and Solvent-Based Recycling Approaches. Polymers, 15(24), 4714. https://doi.org/10.3390/polym15244714
Vancouver
Pin JM, Soltani I, Negrier K, Lee PC. Recyclability of Post-Consumer Polystyrene at Pilot Scale: Comparison of Mechanical and Solvent-Based Recycling Approaches. Polymers. 2023;15(24):4714. doi:10.3390/polym15244714
BibTeX
@article{Pin2023,
author = {Pin, Jean-Mathieu and Soltani, Iman and Negrier, Keny and Lee, Patrick C},
title = {Recyclability of Post-Consumer Polystyrene at Pilot Scale: Comparison of Mechanical and Solvent-Based Recycling Approaches},
journal = {Polymers},
year = {2023},
volume = {15},
number = {24},
pages = {4714},
doi = {10.3390/polym15244714}
}
EUVIMED