Study on Rheological Properties and Pouring Process of Hydroxyl-Terminated Polybutadiene (HTPB) Propellants
Polymers · 14.12.2023 · 15 (24) · 4707
DOI: 10.3390/polym15244707 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 14.12.2023. Verfasst von Haoyu Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Science, Inner Mongolia University of Technology, Hohhot 010000, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The process of solid propellant production, which is the most widely used high-energy material, has garnered significant attention from researchers. However, there have been relatively few studies on its processing, due to the unique nature of the casting process. This paper aims to further analyze the pouring process of the propellant slurry. Initially, we obtained a sample of the propellant slurry and measured its rheological parameters using a rotary rheometer. From the analysis of the experimental results, we derived the viscosity parameters and the yield values of the propellant slurry. Subsequently, we simulated the pouring process, setting the slurry parameters based on the data obtained from the rheological measurement experiment. The simulation results demonstrated that the flower plate significantly impacts upon the cutting and separating effect on the slurry during pouring. Upon leaving the flower plate, the slurry descends onto the core mold platform under the influence of gravity, gradually flowing along the edge of the core mold. Although there may be some small voids in the pouring process, the voids will disappear completely at the end of pouring. A comparison with the actual pouring situation revealed a higher consistency between the simulation results and reality, thus establishing the reliability of the simulation method as a reference for analyzing the pouring process.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Science, Inner Mongolia University of Technology, Hohhot 010000, China.
- School of Civil Engineering, Hebei University of Engineering, Handan 056000, China.
Zitieren
APA
Wang, H., Ji, Y., Jiang, X., & Li, Z. (2023). Study on Rheological Properties and Pouring Process of Hydroxyl-Terminated Polybutadiene (HTPB) Propellants. Polymers, 15(24), 4707. https://doi.org/10.3390/polym15244707
Vancouver
Wang H, Ji Y, Jiang X, Li Z. Study on Rheological Properties and Pouring Process of Hydroxyl-Terminated Polybutadiene (HTPB) Propellants. Polymers. 2023;15(24):4707. doi:10.3390/polym15244707
BibTeX
@article{Wang2023,
author = {Wang, Haoyu and Ji, Yongchao and Jiang, Xiaorui and Li, Zhuo},
title = {Study on Rheological Properties and Pouring Process of Hydroxyl-Terminated Polybutadiene (HTPB) Propellants},
journal = {Polymers},
year = {2023},
volume = {15},
number = {24},
pages = {4707},
doi = {10.3390/polym15244707}
}
EUVIMED