EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Characterization of PHBV/PCL-Diol Blend Films

Tamara Erceg iD, Sanja Rackov iD, Pal Terek iD, Branka Pilić

Polymers · 13.12.2023 · 15 (24) · 4694

DOI: 10.3390/polym15244694 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.12.2023. Verfasst von Tamara Erceg und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Provincial Secretariat for Higher Education and Scientific Research, Autonomous Province of Vojvodina, Republic of Serbia, Ministry of Science, Technological Development and Innovation, Republic of Serbia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable thin films based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(caprolactone diol) (PCL-diol) blend were developed using the solution casting method. PHBV is biodegradable, biocompatible, and produced naturally by bacterial activity, but its use is restricted by high crystallinity and low resistance to thermal degradation with melting temperatures close to degradation thus narrowing the processing window. Solution casting was chosen as a cost-effective method reducing energy consumption and avoiding thermal degradation during processing. The increase in PCL-diol in blend composition (40–60 wt%) enhances the film-forming ability of PHBV and the wettability along with the decrease in the roughness of the resulting materials as revealed by contact angle measurements, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Optimal composition in terms of filmogenity and surface structure has been achieved by the addition of PCL-diol in the amount of 60 wt%. FTIR confirmed the expected chemical structures with no evidence of chemical interactions between the two polymers.

Schlagwörter

Stichwörter der Autor:innen

biopolymersblendfilm-forming abilitypoly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)poly(caprolactone diol) (PCL-diol)

Autor:innen und Institutionen

  • Faculty of Technology Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia.
  • Faculty of Technical Sciences, University of Novi Sad, 21000 Novi Sad, Serbia.

ORCID-Profile: Tamara Erceg, Sanja Rackov, Pal Terek

Förderung

  • Provincial Secretariat for Higher Education and Scientific Research, Autonomous Province of Vojvodina, Republic of Serbia
  • Ministry of Science, Technological Development and Innovation, Republic of Serbia

Zitieren

APA

Erceg, T., Rackov, S., Terek, P., & Pilić, B. (2023). Preparation and Characterization of PHBV/PCL-Diol Blend Films. Polymers, 15(24), 4694. https://doi.org/10.3390/polym15244694

Vancouver

Erceg T, Rackov S, Terek P, Pilić B. Preparation and Characterization of PHBV/PCL-Diol Blend Films. Polymers. 2023;15(24):4694. doi:10.3390/polym15244694

BibTeX
@article{Erceg2023,
  author = {Erceg, Tamara and Rackov, Sanja and Terek, Pal and Pilić, Branka},
  title = {Preparation and Characterization of PHBV/PCL-Diol Blend Films},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {24},
  pages = {4694},
  doi = {10.3390/polym15244694}
}
Kostenlos starten →