EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biocompatibility of ABS and PLA Polymers with Dental Pulp Stem Cells Enhance Their Potential Biomedical Applications

Fabiane Barchiki iD, Letícia Fracaro iD, Alejandro Correa Dominguez, Alexandra Cristina Senegaglia iD, Isadora May Vaz, Paulo Soares iD, Sérgio Adriane Bezerra de Moura iD, Paulo Roberto Slud Brofman iD

Polymers · 06.12.2023 · 15 (24) · 4629

DOI: 10.3390/polym15244629 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.12.2023. Verfasst von Fabiane Barchiki und 7 weiteren Autor:innen. Beteiligte Einrichtung: Core for Cell Technology, School of Medicine, Pontifícia Universidade Católica do Paraná (PUCPR), Curitiba 80215-901, Brazil. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council for Scientific and Technological Development, Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polylactic Acid (PLA) and Acrylonitrile–Butadiene–Styrene (ABS) are commonly used polymers in 3D printing for biomedical applications. Dental Pulp Stem Cells (DPSCs) are an accessible and proliferative source of stem cells with significant differentiation potential. Limited knowledge exists regarding the biocompatibility and genetic safety of ABS and PLA when in contact with DPSCs. This study aimed to investigate the impact of PLA and ABS on the adhesion, proliferation, osteogenic differentiation, genetic stability, proteomics, and immunophenotypic profile of DPSCs. A total of three groups, 1- DPSC-control, 2- DPSC+ABS, and 3- DPSC+PLA, were used in in vitro experiments to evaluate cell morphology, proliferation, differentiation capabilities, genetic stability, proteomics (secretome), and immunophenotypic profiles regarding the interaction between DPSCs and polymers. Both ABS and PLA supported the adhesion and proliferation of DPSCs without exhibiting significant cytotoxic effects and maintaining the capacity for osteogenic differentiation. Genetic stability, proteomics, and immunophenotypic profiles were unaltered in DPSCs post-contact with these polymers, highlighting their biosafety. Our findings suggest that ABS and PLA are biocompatible with DPSCs and demonstrate potential in dental or orthopedic applications; the choice of the polymer will depend on the properties required in treatment. These promising results stimulate further studies to explore the potential therapeutic applications in vivo using prototyped polymers in personalized medicine.

Schlagwörter

Stichwörter der Autor:innen

3D printingABSDPSCsPLAgenetic stabilityosteogenic differentiationregenerative medicinestem cell

Autor:innen und Institutionen

  • Core for Cell Technology, School of Medicine, Pontifícia Universidade Católica do Paraná (PUCPR), Curitiba 80215-901, Brazil.
  • INCT-REGENERA National Institute of Science and Technology in Regenerative Medicine, Rio de Janeiro 21941-902, Brazil.
  • Laboratory of Basic Biology of Stem Cells, Carlos Chagas Institute, Fiocruz-PR, Curitiba 81350-010, Brazil.
  • LaBES-Laboratory of Biomaterials and Surface Engineering, Polytechnic School, Pontifícia Universidade Católica do Paraná (PUCPR), Curitiba 80215-901, Brazil.
  • Departament of Morphology, Campus Universitário Lagoa Nova, Universidade Federal do Rio Grande do Norte (UFRN), Natal 59072-970, Brazil.

ORCID-Profile: Fabiane Barchiki, Letícia Fracaro, Alexandra Cristina Senegaglia, Paulo Soares, Sérgio Adriane Bezerra de Moura, Paulo Roberto Slud Brofman

Förderung

  • National Council for Scientific and Technological Development
  • Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Zitieren

APA

Barchiki, F., Fracaro, L., Dominguez, A. C., Senegaglia, A. C., Vaz, I. M., Soares, P., Moura, S. A. B., & Brofman, P. R. S. (2023). Biocompatibility of ABS and PLA Polymers with Dental Pulp Stem Cells Enhance Their Potential Biomedical Applications. Polymers, 15(24), 4629. https://doi.org/10.3390/polym15244629

Vancouver

Barchiki F, Fracaro L, Dominguez AC, Senegaglia AC, Vaz IM, Soares P, et al. Biocompatibility of ABS and PLA Polymers with Dental Pulp Stem Cells Enhance Their Potential Biomedical Applications. Polymers. 2023;15(24):4629. doi:10.3390/polym15244629

BibTeX
@article{Barchiki2023,
  author = {Barchiki, Fabiane and Fracaro, Letícia and Dominguez, Alejandro Correa and Senegaglia, Alexandra Cristina and Vaz, Isadora May and Soares, Paulo and Moura, Sérgio Adriane Bezerra de and Brofman, Paulo Roberto Slud},
  title = {Biocompatibility of ABS and PLA Polymers with Dental Pulp Stem Cells Enhance Their Potential Biomedical Applications},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {24},
  pages = {4629},
  doi = {10.3390/polym15244629}
}
Kostenlos starten →