Finite Element Analysis of the Effect for Different Thicknesses and Stitching Densities under the Low-Velocity Impact of Stitched Composite Laminates
Polymers · 06.12.2023 · 15 (24) · 4628
DOI: 10.3390/polym15244628 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 06.12.2023. Verfasst von Bangxiong Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Polymer Processing Research Laboratory, School of Advanced Manufacturing, Nanchang University, Nanchang 330031, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jiangxi Provincial Science and Technology Plan of China.
Abstract (Originalsprache)
In this study, a progressive damage model was developed for the mechanical response and damage evolution of carbon fiber stitched composite laminates under low-velocity impact (LVI). The three-dimensional Hashin and Hou failure criteria were used to identify fiber and matrix damage. The cohesive zone model was adopted to simulate the delamination damage, combined with the linear degradation discounting of the equivalent displacement method to characterize the stiffness degradation of the material, and the corresponding user material subroutine VUMAT was coded. The finite element analysis of the LVI of stitched composite laminates under different energies was finished in Abaqus/Explicit. Furthermore, the simulation predictions matched well with the results of the experimental tests. Based on this, composite laminates’ mechanical response and damage forms with different thicknesses and stitch densities were analyzed. The findings show that the main damages of composite laminates were matrix tensile damage and delamination. The stitching process could improve the impact tolerance of composite laminates, inhibiting delamination and reducing the area of the delamination damage. The higher the density of the stitching, the more noticeable its inhibition would be. The thickness of the laminate also had a more significant effect on the damage to the laminate. Thin plates were more prone to matrix tensile damage due to their lower flexural rigidity, whereas thick plates were more susceptible to delamination because of their higher flexural rigidity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Polymer Processing Research Laboratory, School of Advanced Manufacturing, Nanchang University, Nanchang 330031, China.
- School of Mechanical and Electronic Engineering, Jingdezhen University, Jingdezhen 333000, China.
- School of Mechatronics and Vehicle Engineering, East China Jiao Tong University, Nanchang 330013, China.
ORCID-Profile: Bangxiong Liu, Zhichao Huang
Förderung
- National Natural Science Foundation of China
- Jiangxi Provincial Science and Technology Plan of China
Zitieren
APA
Liu, B., Lai, J., Liu, H., Huang, Z., Liu, T., Xia, Y., & Zhang, W. (2023). Finite Element Analysis of the Effect for Different Thicknesses and Stitching Densities under the Low-Velocity Impact of Stitched Composite Laminates. Polymers, 15(24), 4628. https://doi.org/10.3390/polym15244628
Vancouver
Liu B, Lai J, Liu H, Huang Z, Liu T, Xia Y, et al. Finite Element Analysis of the Effect for Different Thicknesses and Stitching Densities under the Low-Velocity Impact of Stitched Composite Laminates. Polymers. 2023;15(24):4628. doi:10.3390/polym15244628
BibTeX
@article{Liu2023,
author = {Liu, Bangxiong and Lai, Jiamei and Liu, Hesheng and Huang, Zhichao and Liu, Tianlei and Xia, Yousheng and Zhang, Wei},
title = {Finite Element Analysis of the Effect for Different Thicknesses and Stitching Densities under the Low-Velocity Impact of Stitched Composite Laminates},
journal = {Polymers},
year = {2023},
volume = {15},
number = {24},
pages = {4628},
doi = {10.3390/polym15244628}
}
EUVIMED