EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Comparative Study on Crystallisation for Virgin and Recycled Polyethylene Terephthalate (PET): Multiscale Effects on Physico-Mechanical Properties

Laurianne Viora, Marie Combeau, Monica Francesca Pucci iD, Didier Perrin iD, Pierre-Jacques Liotier iD, Jean-Luc Bouvard, Christelle Combeaud

Polymers · 04.12.2023 · 15 (23) · 4613

DOI: 10.3390/polym15234613 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.12.2023. Verfasst von Laurianne Viora und 6 weiteren Autor:innen. Beteiligte Einrichtung: Mines Paris, Centre for Material Forming (CEMEF), PSL University, UMR CNRS 7635, 1 rue Claude Daunesse, CS 10207, 06904 Sophia Antipolis, France. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CARNOT MINES 2020.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(Ethylene Terephthalate) (PET) is one of the most used polymers for packaging applications. Modifications induced by service conditions and the means to make this matter circular have to be understood to really close the loop (from bottle to bottle for example). Physico-chemical properties, crystalline organisation, and mechanical behaviour of virgin PET (vPET) are compared with those of recycled PET (rPET). Using different combined experimental methods (Calorimetry, Small Angle X-ray Scattering [SAXS], Atomic Force Microscopy [AFM], Dynamic Mechanical Analysis [DMA], and uniaxial tensile test), it has been proven that even if there is no change in the crystallinity of PET, the crystallisation process shows some differences (size and number of spherulites). The potential impact of these differences on local mechanical characterisation is explored and tends to demonstrate the development of a homogeneous microstructure, leading to well-controlled and relevant local mechanical property characterisation. The main contribution of the present study is a better understanding of crystallisation of PET and recycled PET during forming processes such as thermoforming or Injection Stretch Blow Moulding (ISBM), during which elongation at the point of breaking can depend on the microstructure conditioned by the crystallisation process.

Schlagwörter

Stichwörter der Autor:innen

crystallinityrecycled PETthermal and mechanical properties

Autor:innen und Institutionen

  • Mines Paris, Centre for Material Forming (CEMEF), PSL University, UMR CNRS 7635, 1 rue Claude Daunesse, CS 10207, 06904 Sophia Antipolis, France.
  • PCH, IMT Mines Ales, 30100 Ales, France.
  • LMGC, IMT Mines Ales, University of Montpellier, CNRS, 30100 Ales, France.

ORCID-Profile: Monica Francesca Pucci, Didier Perrin, Pierre-Jacques Liotier

Förderung

  • CARNOT MINES 2020

Zitieren

APA

Viora, L., Combeau, M., Pucci, M. F., Perrin, D., Liotier, P. J., Bouvard, J. L., & Combeaud, C. (2023). A Comparative Study on Crystallisation for Virgin and Recycled Polyethylene Terephthalate (PET): Multiscale Effects on Physico-Mechanical Properties. Polymers, 15(23), 4613. https://doi.org/10.3390/polym15234613

Vancouver

Viora L, Combeau M, Pucci MF, Perrin D, Liotier PJ, Bouvard JL, et al. A Comparative Study on Crystallisation for Virgin and Recycled Polyethylene Terephthalate (PET): Multiscale Effects on Physico-Mechanical Properties. Polymers. 2023;15(23):4613. doi:10.3390/polym15234613

BibTeX
@article{Viora2023,
  author = {Viora, Laurianne and Combeau, Marie and Pucci, Monica Francesca and Perrin, Didier and Liotier, Pierre-Jacques and Bouvard, Jean-Luc and Combeaud, Christelle},
  title = {A Comparative Study on Crystallisation for Virgin and Recycled Polyethylene Terephthalate (PET): Multiscale Effects on Physico-Mechanical Properties},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {23},
  pages = {4613},
  doi = {10.3390/polym15234613}
}
Kostenlos starten →