Structure Dependent Electrochemical Behaviors of Hard Carbon Anode Materials Derived from Natural Polymer for Next-Generation Sodium Ion Battery
Polymers · 10.11.2023 · 15 (22) · 4373
DOI: 10.3390/polym15224373 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.11.2023. Verfasst von Jungpil Kim und 4 weiteren Autor:innen. Beteiligte Einrichtung: Carbon & Light Materials Application R&D Group, Korea Institute of Industrial Technology, Jeonju 54853, Republic of Korea. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Rural Development Administration, National Research Foundation of Korea, Korea Institute of Industrial Technology.
Abstract (Originalsprache)
Hard carbons are one of the most promising anode materials for next-generation sodium-ion batteries due to their high reversible capacity, long cycle life, and low cost. The advantage in terms of price of hard carbons can be further improved by using cheaper resources such as biomass waste as precursors. Lignin is one of the richest natural bio-polymer in the earth which can be obtained from woods. As the lignin has three-dimensional amorphous polymeric structure, it is considered as good precursor for producing carbonaceous materials under proper carbonization processes for energy storage devices. In this study, structural properties of lignin-derived hard carbons such as interlayer spacing, degree of disorder and surface defects are controlled. Specifically, lignin-derived hard carbons were synthesized at 1000 °C, 1250 °C, and 1500 °C, and it was confirmed that the structure gradually changed from a disordered structure to ordered structure through X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. Hard carbons exhibit sloping regions at high voltage and plateau region at low voltage during the electrochemical processes for sodium ions. As the heat treatment temperature increases, the contribution to the overall reversible capacity of the sloping region decreases and the contribution of the plateau region increases. This trend confirms that it affects reversible capacity, rate-capability, and cycling stability, meaning that an understanding of structural properties and related electrochemical properties is necessary when developing hard carbon as a negative electrode material for sodium ion batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Carbon & Light Materials Application R&D Group, Korea Institute of Industrial Technology, Jeonju 54853, Republic of Korea.
- Department of Chemistry, Sejong University, Seoul 05006, Republic of Korea.
- School of Forestry Sciences and Landscape Architecture, Kyungpook National University, Daegu 41566, Republic of Korea.
- Lignum, Daejeon 34134, Republic of Korea.
ORCID-Profile: Jungpil Kim, Bonwook Koo
Förderung
- Rural Development Administration
- National Research Foundation of Korea
- Korea Institute of Industrial Technology
Zitieren
APA
Kim, J., Han, S. D., Koo, B., Lee, S. H., & Yang, J. (2023). Structure Dependent Electrochemical Behaviors of Hard Carbon Anode Materials Derived from Natural Polymer for Next-Generation Sodium Ion Battery. Polymers, 15(22), 4373. https://doi.org/10.3390/polym15224373
Vancouver
Kim J, Han SD, Koo B, Lee SH, Yang J. Structure Dependent Electrochemical Behaviors of Hard Carbon Anode Materials Derived from Natural Polymer for Next-Generation Sodium Ion Battery. Polymers. 2023;15(22):4373. doi:10.3390/polym15224373
BibTeX
@article{Kim2023,
author = {Kim, Jungpil and Han, Sang-Don and Koo, Bonwook and Lee, Sang-Hyun and Yang, Junghoon},
title = {Structure Dependent Electrochemical Behaviors of Hard Carbon Anode Materials Derived from Natural Polymer for Next-Generation Sodium Ion Battery},
journal = {Polymers},
year = {2023},
volume = {15},
number = {22},
pages = {4373},
doi = {10.3390/polym15224373}
}
EUVIMED