Room-Temperature NH3 Gas Surface Acoustic Wave (SAW) Sensors Based on Graphene/PPy Composite Films Decorated by Au Nanoparticles with ppb Detection Ability
Polymers · 08.11.2023 · 15 (22) · 4353
DOI: 10.3390/polym15224353 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 08.11.2023. Verfasst von Chi-Yen Shen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, I-Shou University, Kaohsiung 84001, Taiwan. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Taiwan.
Abstract (Originalsprache)
Exhaled human breath analysis has great potential for the diagnosis of diseases in non-invasive way. The 13C-Urea breath test for the diagnosis of Helicobacter pylori infection indicates the ammonia concentration of 50–400 ppb in the breath. This work successfully developed a surface acoustic wave (SAW) resonator based on graphene/polypyrrole composite films decorated by gold nanoparticles (AuNPs–G/PPy) with sensitivity and selectivity to detect ammonia in parts-per-billion concentrations, which is promising for the accurate diagnosis of H. pylori infection. XRD, EDS, and SEM characterized the AuNPs–G/PPy nanocomposites, providing comprehensive insights into their structural, compositional, and morphological properties. The gas-sensing capabilities of the fabricated SAW sensors were extensively investigated, focusing on their response to NH3 gas at ambient temperature. The concentration of ammonia gas was effectively quantified by monitoring the frequency shift of the SAW device. Notably, our developed SAW sensor demonstrated outstanding sensitivity, selectivity, repeatability, and reproducibility for 50–1000 ppb NH3 in dry air. The excellent sensing performance of the AuNPs–G/PPy hybrid composite film can be attributed to the synergistic effects of graphene’s superior conductivity, the catalytic properties of gold nanoparticles, and the conductivity sensitization facilitated by electron-hole recombination on the polypyrrole surface.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical Engineering, I-Shou University, Kaohsiung 84001, Taiwan.
- Department of Chemical Engineering, I-Shou University, Kaohsiung 84001, Taiwan.
- Division of Gastroenterology and Hepatology, Department of Internal Medicine, E-Da Hospital, I-Shou University, Kaohsiung 82445, Taiwan.
- School of Medicine for International Students, College of Medicine, I-Shou University, Kaohsiung 82445, Taiwan.
ORCID-Profile: Chi-Yen Shen, Tien-Tsan Hung
Förderung
- National Science and Technology Council, Taiwan
Zitieren
APA
Shen, C. Y., Hung, T. T., Chuang, Y. W., Lai, S. K., & Tai, C. M. (2023). Room-Temperature NH3 Gas Surface Acoustic Wave (SAW) Sensors Based on Graphene/PPy Composite Films Decorated by Au Nanoparticles with ppb Detection Ability. Polymers, 15(22), 4353. https://doi.org/10.3390/polym15224353
Vancouver
Shen CY, Hung TT, Chuang YW, Lai SK, Tai CM. Room-Temperature NH3 Gas Surface Acoustic Wave (SAW) Sensors Based on Graphene/PPy Composite Films Decorated by Au Nanoparticles with ppb Detection Ability. Polymers. 2023;15(22):4353. doi:10.3390/polym15224353
BibTeX
@article{Shen2023,
author = {Shen, Chi-Yen and Hung, Tien-Tsan and Chuang, Yao-Wei and Lai, Shao-Kai and Tai, Chi-Ming},
title = {Room-Temperature NH3 Gas Surface Acoustic Wave (SAW) Sensors Based on Graphene/PPy Composite Films Decorated by Au Nanoparticles with ppb Detection Ability},
journal = {Polymers},
year = {2023},
volume = {15},
number = {22},
pages = {4353},
doi = {10.3390/polym15224353}
}
EUVIMED