EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of the Chemical Properties of Silane Coupling Agents on Interfacial Bonding Strength with Thermoplastics in the Resizing of Recycled Carbon Fibers

Hyunkyung Lee iD, Minsu Kim iD, Gyungha Kim iD, Daeup Kim

Polymers · 30.10.2023 · 15 (21) · 4273

DOI: 10.3390/polym15214273 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.10.2023. Verfasst von Hyunkyung Lee und 3 weiteren Autor:innen. Beteiligte Einrichtung: Carbon & Light Materials Application Group, Korea Institute of Industrial Technology, Bucheon 14449, Republic of Korea. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry, and Energy in Republic of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Upcycling recycled carbon fibers recovered from waste carbon composites can reduce the price of carbon fibers while improving disposal-related environmental problems. This study assessed and characterized recycled carbon fibers subjected to sizing treatment using N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (APS) chemically coordinated with polyamide 6 (PA6) and polypropylene (PP) resins. Sizing treatment with 1 wt.% APS for 10 s yielded O=C-O on the surface of the carbon fiber, and the -SiOH in the APS underwent a dehydration–condensation reaction that converted O=C-O (lactone groups) into bonds of C-O (hydroxyl groups) and C=O (carbonyl groups). The effects of C-O and C=O on the interfacial bonding force increased to a maximum, resulting in an oxygen-to-carbon ratio (O/C) of 0.26. The polar/surface energy ratio showed the highest value of 32.29% at 10 s, and the interfacial bonding force showed the maximum value of 32 MPa at 10 s, which is about 15% better than that of commercial carbon fiber (PA6-based condition). In 10 s resizing treatments with 0.5 wt.% 3-methacryloxypropyltrimethoxysilane (MPS), C-O, C=O, and O=C-O underwent a dehydration–condensation reaction with -SiOH, which broke the bonds between carbon and oxygen and introduced a methacrylate group (H2C=C(CH3)CO2H), resulting in a significant increase in C-O and C=O, with an O/C of 0.51. The polar/surface free energy ratio was about 38% at 10 s, with the interfacial bonding force increasing to 27% compared to commercial carbon fiber (PP-based conditions). MPS exhibited a superior interfacial shear strength improvement, two times higher than that of APS, with excellent coordination with PP resin and commercial carbon fiber, although the interfacial bonding strength of the PP resin was significantly lower.

Schlagwörter

Stichwörter der Autor:innen

carbon fiberinterfacial shear strengthmechanismoxygen functional groupresizingsilane coupling agentthermoplastic

Autor:innen und Institutionen

  • Carbon & Light Materials Application Group, Korea Institute of Industrial Technology, Bucheon 14449, Republic of Korea.
  • Department of Carbon Material Fiber Engineering, Chonbuk National University, Jeonju 54896, Republic of Korea.

ORCID-Profile: Hyunkyung Lee, Minsu Kim, Gyungha Kim

Förderung

  • Ministry of Trade, Industry, and Energy in Republic of Korea

Zitieren

APA

Lee, H., Kim, M., Kim, G., & Kim, D. (2023). Effect of the Chemical Properties of Silane Coupling Agents on Interfacial Bonding Strength with Thermoplastics in the Resizing of Recycled Carbon Fibers. Polymers, 15(21), 4273. https://doi.org/10.3390/polym15214273

Vancouver

Lee H, Kim M, Kim G, Kim D. Effect of the Chemical Properties of Silane Coupling Agents on Interfacial Bonding Strength with Thermoplastics in the Resizing of Recycled Carbon Fibers. Polymers. 2023;15(21):4273. doi:10.3390/polym15214273

BibTeX
@article{Lee2023,
  author = {Lee, Hyunkyung and Kim, Minsu and Kim, Gyungha and Kim, Daeup},
  title = {Effect of the Chemical Properties of Silane Coupling Agents on Interfacial Bonding Strength with Thermoplastics in the Resizing of Recycled Carbon Fibers},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {4273},
  doi = {10.3390/polym15214273}
}
Kostenlos starten →