EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Poly(vinyl alcohol) Grafted Glycidyl Methacrylate/Cellulose Nanofiber Injectable Hydrogels for Meniscus Tissue Engineering

Jiraporn Sinna, Rachasit Jeencham, Priyapat Mueangkhot, Sorasak Sophon, Pornpattara Noralak, Romtira Raksapakdee, Piya-On Numpaisal iD, Yupaporn Ruksakulpiwat iD

Polymers · 26.10.2023 · 15 (21) · 4230

DOI: 10.3390/polym15214230 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.10.2023. Verfasst von Jiraporn Sinna und 7 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Biocomposite Materials for Medical Industry and Agricultural and Food Industry, Nakhon Ratchasima 30000, Thailand. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Suranaree University of Technology Research and Development Found.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to develop poly (vinyl alcohol) grafted glycidyl methacrylate/cellulose nanofiber (PVA-g-GMA/CNF) injectable hydrogels for meniscus tissue engineering. PVA-g-GMA is an interesting polymer for preparing cross-linking injectable hydrogels with UV radiation, but it has poor mechanical properties and low cell proliferation. In this study, CNF as a reinforcing agent was selected to improve mechanical properties and cell proliferation in PVA-g-GMA injectable hydro-gels. The effect of CNF concentration on hydrogel properties was investigated. Both PVA-g-GMA and PVA-g-GMA hydrogels incorporating 0.3, 0.5, and 0.7% (w/v) CNF can be formed by UV curing at a wavelength of 365 nm, 6 mW/cm2 for 10 min. All hydrogels showed substantial microporosity with interconnected tunnels, and a pore size diameter range of 3–68 µm. In addition, all hydrogels also showed high physicochemical properties, a gel fraction of 81–82%, porosity of 83–94%, water content of 73–87%, and water swelling of 272–652%. The water content and swelling of hydrogels were increased when CNF concentration increased. It is worth noting that the reduction of porosity in the hydrogels occurred with increasing CNF concentration. With increasing CNF concentration from 0.3% to 0.7% (w/v), the compressive strength and compressive modulus of the hydrogels significantly increased from 23 kPa to 127 kPa and 27 kPa to 130 kPa, respectively. All of the hydrogels were seeded with human cartilage stem/progenitor cells (CSPCs) and cultured for 14 days. PVA-g-GMA hydrogels incorporating 0.5% and 0.7% (w/v) CNF demonstrated a higher cell proliferation rate than PVA-g-GMA and PVA-g-GMA hydrogels incorporating 0.3% (w/v) CNF, as confirmed by MTT assay. At optimum formulation, 10%PVA-g-GMA/0.7%CNF injectable hydrogel met tissue engineering requirements, which showed excellent properties and significantly promoted cell proliferation, and has a great potential for meniscus tissue engineering application.

Schlagwörter

Stichwörter der Autor:innen

cellulose nanofiberinjectable hydrogelsmeniscuspoly (vinyl alcohol) grafted glycidyl methacrylatetissue engineering

Autor:innen und Institutionen

  • Research Center for Biocomposite Materials for Medical Industry and Agricultural and Food Industry, Nakhon Ratchasima 30000, Thailand.
  • School of Polymer Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand.
  • School of Orthopaedics, Institute of Medicine, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand.

ORCID-Profile: Piya-On Numpaisal, Yupaporn Ruksakulpiwat

Förderung

  • Suranaree University of Technology Research and Development Found

Zitieren

APA

Sinna, J., Jeencham, R., Mueangkhot, P., Sophon, S., Noralak, P., Raksapakdee, R., Numpaisal, P. O., & Ruksakulpiwat, Y. (2023). Development of Poly(vinyl alcohol) Grafted Glycidyl Methacrylate/Cellulose Nanofiber Injectable Hydrogels for Meniscus Tissue Engineering. Polymers, 15(21), 4230. https://doi.org/10.3390/polym15214230

Vancouver

Sinna J, Jeencham R, Mueangkhot P, Sophon S, Noralak P, Raksapakdee R, et al. Development of Poly(vinyl alcohol) Grafted Glycidyl Methacrylate/Cellulose Nanofiber Injectable Hydrogels for Meniscus Tissue Engineering. Polymers. 2023;15(21):4230. doi:10.3390/polym15214230

BibTeX
@article{Sinna2023,
  author = {Sinna, Jiraporn and Jeencham, Rachasit and Mueangkhot, Priyapat and Sophon, Sorasak and Noralak, Pornpattara and Raksapakdee, Romtira and Numpaisal, Piya-On and Ruksakulpiwat, Yupaporn},
  title = {Development of Poly(vinyl alcohol) Grafted Glycidyl Methacrylate/Cellulose Nanofiber Injectable Hydrogels for Meniscus Tissue Engineering},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {4230},
  doi = {10.3390/polym15214230}
}
Kostenlos starten →