EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of the Peel Strength of Artificial Leather and Polypropylene Specimens

Deokrae Kim, Youngshin Kim, Euysik Jeon iD

Polymers · 25.10.2023 · 15 (21) · 4217

DOI: 10.3390/polym15214217 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.10.2023. Verfasst von Deokrae Kim und 2 weiteren Autor:innen. Beteiligte Einrichtung: R&D Center, Yongsan Company, 62-48, Sinjeong-ro 293, Asan-si 31539, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry, and Energy, Korea, Korea Institute for Advancement of Technology (KIAT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the surface properties and adhesive strength of polypropylene (PP) in order to enhance the bond between PP injection-molded specimens and polyvinyl chloride (PVC) synthetic artificial leather. Plasma, primer, and flame treatments were applied to the surface of each specimen prepared using the two types of injection molds. The surface morphology, surface roughness, and contact angle were analyzed, and peel-strength analyses and a morphological inspections of the peeled specimens were performed. The peeling strength of the PP injection molding was measured, followed by a morphological examination of the peeled specimens. The plasma and flame treatments improved the peel strength, and the plasma and flame treatments changed the rough exterior to a hydrophilic surface, improving the peel strength. In addition, the primer treatment exhibited a lower peel strength than did the other treatments. This confirmed the low adhesion of the primer to the hydrophobic PP surface. The outcomes of this study can be employed across a multitude of industries that require improved adhesion for PP injection molded products.

Schlagwörter

Stichwörter der Autor:innen

artificial leatherpeel strengthpolypropylenesurface treatment

Autor:innen und Institutionen

  • R&D Center, Yongsan Company, 62-48, Sinjeong-ro 293, Asan-si 31539, Republic of Korea.
  • Department of Mechanical Engineering, Graduate School, Kongju National University, Cheonan-si 31080, Republic of Korea.
  • Graduate Program for Eco-Friendly Future Automotive Technology, Kongju National University, Cheonan-si 31080, Republic of Korea.
  • Industrial Technology Research Institute, Kongju National University, Cheonan-si 31080, Republic of Korea.
  • Department of Future Convergence Engineering, Kongju National University, Cheonan-si 31080, Republic of Korea.

ORCID-Profile: Euysik Jeon

Förderung

  • Ministry of Trade, Industry, and Energy, Korea
  • Korea Institute for Advancement of Technology (KIAT)

Zitieren

APA

Kim, D., Kim, Y., & Jeon, E. (2023). Experimental Investigation of the Peel Strength of Artificial Leather and Polypropylene Specimens. Polymers, 15(21), 4217. https://doi.org/10.3390/polym15214217

Vancouver

Kim D, Kim Y, Jeon E. Experimental Investigation of the Peel Strength of Artificial Leather and Polypropylene Specimens. Polymers. 2023;15(21):4217. doi:10.3390/polym15214217

BibTeX
@article{Kim2023,
  author = {Kim, Deokrae and Kim, Youngshin and Jeon, Euysik},
  title = {Experimental Investigation of the Peel Strength of Artificial Leather and Polypropylene Specimens},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {4217},
  doi = {10.3390/polym15214217}
}
Kostenlos starten →