EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing the Piezoelectric Properties of 3D Printed PVDF Using Concurrent Torsional Shear Strain

Pu Han, Alireza Tofangchi iD, Derek Carr, Sihan Zhang, Keng Hsu

Polymers · 24.10.2023 · 15 (21) · 4204

DOI: 10.3390/polym15214204 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 24.10.2023. Verfasst von Pu Han und 4 weiteren Autor:innen. Beteiligte Einrichtung: Ira A Fulton Schools of Engineering, Arizona State University, Tempe, AZ 85212, USA. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Extrusion-based polymer 3D printing induces shear strains within the material, influencing its rheological and mechanical properties. In materials like polyvinylidene difluoride (PVDF), these strains stretch polymer chains, leading to increased crystallinity and improved piezoelectric properties. This study demonstrates a 400% enhancement in the piezoelectric property of extrusion-printed PVDF by introducing additional shear strains during the printing process. The continuous torsional shear strains, imposed via a rotating extrusion nozzle, results in additional crystalline β-phases, directly impacting the piezoelectric behavior of the printed parts. The effect of the nozzle’s rotational speed on the amount of β-phase formation is characterized using FTIR. This research introduces a new direction in the development of polymer and composite 3D printing, where in-process shear strains are used to control the alignment of polymer chains and/or in-fill phases and the overall properties of printed parts.

Schlagwörter

Stichwörter der Autor:innen

3D printingPVDFpiezoelectric propertiestorsional shear strain

Autor:innen und Institutionen

  • Ira A Fulton Schools of Engineering, Arizona State University, Tempe, AZ 85212, USA.
  • J. B. Speed School of Engineering, University of Louisville, Louisville, KY 40208, USA.

ORCID-Profile: Alireza Tofangchi

Zitieren

APA

Han, P., Tofangchi, A., Carr, D., Zhang, S., & Hsu, K. (2023). Enhancing the Piezoelectric Properties of 3D Printed PVDF Using Concurrent Torsional Shear Strain. Polymers, 15(21), 4204. https://doi.org/10.3390/polym15214204

Vancouver

Han P, Tofangchi A, Carr D, Zhang S, Hsu K. Enhancing the Piezoelectric Properties of 3D Printed PVDF Using Concurrent Torsional Shear Strain. Polymers. 2023;15(21):4204. doi:10.3390/polym15214204

BibTeX
@article{Han2023,
  author = {Han, Pu and Tofangchi, Alireza and Carr, Derek and Zhang, Sihan and Hsu, Keng},
  title = {Enhancing the Piezoelectric Properties of 3D Printed PVDF Using Concurrent Torsional Shear Strain},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {4204},
  doi = {10.3390/polym15214204}
}
Kostenlos starten →