Study of Damage Prediction of Carbon Fiber Tows Using Eddy Current Measurement
Polymers · 21.10.2023 · 15 (20) · 4182
DOI: 10.3390/polym15204182 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.10.2023. Verfasst von Jeong U Roh und 6 weiteren Autor:innen. Beteiligte Einrichtung: Composites Convergence Research Center, Korea Textile Machinery Convergence Research Institute, Gyeongsan 38542, Republic of Korea. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Korea Agency for Infrastructure Technology Advancement, Ministry of Education, Korea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE).
Abstract (Originalsprache)
When manufacturing fiber-reinforced composites, it is possible to improve the quality of fiber steel fire and reduce the number of cracks in the finished product if it is possible to quickly identify the defects of the fiber tow. Therefore, in this study, we developed a method to identify the condition of carbon fiber tow using eddy current test (ECT), which is used to improve the quality of composite materials. Using the eddy current detection sensor, we checked the impedance results according to the condition of the CF tow. We found that the materials of the workbench used in the experiment greatly affected the ECT results, so it is necessary to use a material with a non-conductive and smooth surface. We evaluated the impedance results of the carbon fiber at 2 mm intervals using the ECT sensor and summarized the impedance results according to the fiber width direction, presenting the condition of the section as a constant of variation (CV). If the condition of the carbon fiber tow was unstable, the deviation of the CV per section was large. In particular, the deviation of the CV per section was more than 0.15 when the arrangement of the fibers was changed, foreign substances were formed on the surface of the fibers, and damage occurred in the direction of the fiber width of more than 4 mm, so it was easy to evaluate the quality on CF tow.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Composites Convergence Research Center, Korea Textile Machinery Convergence Research Institute, Gyeongsan 38542, Republic of Korea.
- High-Tech Product Research Headquarters, Korea Textile Machinery Convergence Research Institute, Gyeongsan 38542, Republic of Korea.
- Vastek Korea Co., Ltd., Bucheon 14502, Republic of Korea.
- Research Institute for Green Energy Convergence Technology, Gyeongsang National University, Jinju 52828, Republic of Korea.
- Department of Carbon & Nanomaterials Engineering, Jeonju University, Jeonju 55069, Republic of Korea.
- Department of Materials Science and Convergence Technology, Gyeongsang National University, Jinju 52828, Republic of Korea.
ORCID-Profile: Sangjin Lee, Dong-Jun Kwon
Förderung
- the Korea Agency for Infrastructure Technology Advancement
- Ministry of Education
- Korea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE)
- Korea Carbon Industry Promotion Agency funded by the Ministry of Trade, Industry & Energy of the Republic of Korea
- Korea Agency for Infrastructure Technology Advancement
- Korea Government (MOTIE)
- Ministry of Trade, Industry & Energy of the Republic of Korea
Zitieren
APA
Roh, J. U., Kwon, H., Lee, S., Ha, J. C., Yang, S. B., Lee, H., & Kwon, D. J. (2023). Study of Damage Prediction of Carbon Fiber Tows Using Eddy Current Measurement. Polymers, 15(20), 4182. https://doi.org/10.3390/polym15204182
Vancouver
Roh JU, Kwon H, Lee S, Ha JC, Yang SB, Lee H, et al. Study of Damage Prediction of Carbon Fiber Tows Using Eddy Current Measurement. Polymers. 2023;15(20):4182. doi:10.3390/polym15204182
BibTeX
@article{Roh2023,
author = {Roh, Jeong U and Kwon, Hyein and Lee, Sangjin and Ha, Jae Chung and Yang, Seong Baek and Lee, Haeseong and Kwon, Dong-Jun},
title = {Study of Damage Prediction of Carbon Fiber Tows Using Eddy Current Measurement},
journal = {Polymers},
year = {2023},
volume = {15},
number = {20},
pages = {4182},
doi = {10.3390/polym15204182}
}
EUVIMED