EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

UV-Cured Bio-Based Acrylated Soybean Oil Scaffold Reinforced with Bioactive Glasses

Matteo Bergoglio iD, Ziba Najmi iD, Andrea Cochis iD, Marta Miola iD, Enrica Vernè iD, Marco Sangermano iD

Polymers · 14.10.2023 · 15 (20) · 4089

DOI: 10.3390/polym15204089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.10.2023. Verfasst von Matteo Bergoglio und 5 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie, PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR)—MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a bio-based acrylate resin derived from soybean oil was used in combination with a reactive diluent, isobornyl acrylate, to synthetize a composite scaffold reinforced with bioactive glass particles. The formulation contained acrylated epoxidized soybean oil (AESO), isobornyl acrylate (IBOA), a photo-initiator (Irgacure 819) and a bioactive glass particle. The resin showed high reactivity towards radical photopolymerisation, and the presence of the bioactive glass did not significantly affect the photocuring process. The 3D-printed samples showed different properties from the mould-polymerised samples. The glass transition temperature Tg showed an increase of 3D samples with increasing bioactive glass content, attributed to the layer-by-layer curing process that resulted in improved interaction between the bioactive glass and the polymer matrix. Scanning electron microscope analysis revealed an optimal distribution on bioactive glass within the samples. Compression tests indicated that the 3D-printed sample exhibited higher modulus compared to mould-synthetized samples, proving the enhanced mechanical behaviour of 3D-printed scaffolds. The cytocompatibility and biocompatibility of the samples were evaluated using human bone marrow mesenchymal stem cells (bMSCs). The metabolic activity and attachment of cells on the samples’ surfaces were analysed, and the results demonstrated higher metabolic activity and increased cell attachment on the surfaces containing higher bioactive glass content. The viability of the cells was further confirmed through live/dead staining and reseeding experiments. Overall, this study presents a novel approach for fabricating bioactive glass reinforced scaffolds using 3D printing technology, offering potential applications in tissue engineering.

Schlagwörter

Stichwörter der Autor:innen

3D printingbio-based scaffoldbioactive glassphotopolymerthermosets

Autor:innen und Institutionen

  • Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy.
  • Department of Health Sciences, Center for Translational Research on Autoimmune and Allergic Diseases-CAAD, Università Del Piemonte Orientale (UPO), 28100 Novara, Italy.

ORCID-Profile: Matteo Bergoglio, Ziba Najmi, Andrea Cochis, Marta Miola, Enrica Vernè, Marco Sangermano

Förderung

  • European Commission
  • European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie
  • PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR)—MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4

Zitieren

APA

Bergoglio, M., Najmi, Z., Cochis, A., Miola, M., Vernè, E., & Sangermano, M. (2023). UV-Cured Bio-Based Acrylated Soybean Oil Scaffold Reinforced with Bioactive Glasses. Polymers, 15(20), 4089. https://doi.org/10.3390/polym15204089

Vancouver

Bergoglio M, Najmi Z, Cochis A, Miola M, Vernè E, Sangermano M. UV-Cured Bio-Based Acrylated Soybean Oil Scaffold Reinforced with Bioactive Glasses. Polymers. 2023;15(20):4089. doi:10.3390/polym15204089

BibTeX
@article{Bergoglio2023,
  author = {Bergoglio, Matteo and Najmi, Ziba and Cochis, Andrea and Miola, Marta and Vernè, Enrica and Sangermano, Marco},
  title = {UV-Cured Bio-Based Acrylated Soybean Oil Scaffold Reinforced with Bioactive Glasses},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {20},
  pages = {4089},
  doi = {10.3390/polym15204089}
}
Kostenlos starten →