Metal–Metal Bonding Process Research Based on Xgboost Machine Learning Algorithm
Polymers · 14.10.2023 · 15 (20) · 4085
DOI: 10.3390/polym15204085 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 14.10.2023. Verfasst von Jingpeng Feng und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program, Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University.
Abstract (Originalsprache)
Conventionally, the optimization of bonding process parameters requires multi-parameter repetitive experiments, the processing of data, and the characterization of complex relationships between process parameters, and performance must be achieved with the help of new technologies. This work focused on improving metal–metal bonding performance by applying SLJ experiments, finite element models (FEMs), and the Xgboost machine learning (ML) algorithm. The importance ranking of process parameters on tensile–shear strength (TSS) was evaluated with the interpretation toolkit SHAP (Shapley additive explanations) and it optimized reasonable bonding process parameters. The validity of the FEM was verified using SLJ experiments. The Xgboost models with 70 runs can achieve better prediction results. According to the degree of influence, the process parameters affecting the TSS ranked from high to low are roughness, adhesive layer thickness, and lap length, and the corresponding optimized values were 0.89 μm, 0.1 mm, and 27 mm, respectively. The experimentally measured TSS values increased by 14% from the optimized process parameters via the Xgboost model. ML methods provide a more accurate and intuitive understanding of process parameters on TSS.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha 410083, China.
- Light Alloys Research Institute, Central South University, Changsha 410083, China.
ORCID-Profile: Lihua Zhan, Bolin Ma
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program
- Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University
Zitieren
APA
Feng, J., Zhan, L., Ma, B., Zhou, H., Xiong, B., Guo, J., Xia, Y., & Hui, S. (2023). Metal–Metal Bonding Process Research Based on Xgboost Machine Learning Algorithm. Polymers, 15(20), 4085. https://doi.org/10.3390/polym15204085
Vancouver
Feng J, Zhan L, Ma B, Zhou H, Xiong B, Guo J, et al. Metal–Metal Bonding Process Research Based on Xgboost Machine Learning Algorithm. Polymers. 2023;15(20):4085. doi:10.3390/polym15204085
BibTeX
@article{Feng2023,
author = {Feng, Jingpeng and Zhan, Lihua and Ma, Bolin and Zhou, Hao and Xiong, Bang and Guo, Jinzhan and Xia, Yunni and Hui, Shengmeng},
title = {Metal–Metal Bonding Process Research Based on Xgboost Machine Learning Algorithm},
journal = {Polymers},
year = {2023},
volume = {15},
number = {20},
pages = {4085},
doi = {10.3390/polym15204085}
}
EUVIMED