Freeze–Thaw Damage Mechanism Analysis of SBS Asphalt Mixture Containing Basalt Fiber and Lignocellulosic Fiber Based on Microscopic Void Characteristics
Polymers · 26.09.2023 · 15 (19) · 3887
DOI: 10.3390/polym15193887 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.09.2023. Verfasst von Wensheng Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Transportation, Jilin University, Changchun 130025, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Project of the Department of Education of Jilin Province, Jilin University.
Abstract (Originalsprache)
Freeze–thaw effects pose the significant challenge to asphalt pavement durability, leading to various types of distress and deterioration. This study investigates the freeze–thaw damage mechanism of Styrene–Butadiene–Styrene (SBS) asphalt mixtures containing reinforcement fibers, specifically basalt fiber as well as lignocellulosic fiber, through a microscopic void characteristics analysis. This investigation aims to understand how the presence of basalt fiber as well as lignocellulosic fiber influences void characteristics for SBS asphalt mixtures during freeze–thaw cycles. A comprehensive experimental program was conducted for the void and mechanical characteristics, which involved the preparation of SBS asphalt mixtures containing basalt fiber as well as lignocellulosic fiber. The mechanical performances of the two types of asphalt mixtures decrease with more freeze–thaw cycles. The decline is faster initially and gradually slows down. Basalt-fiber-modified SMA-13 has higher air void content and mechanical properties compared to lignocellulosic-fiber-modified SMA-13, indicating that adding basalt fibers improves the mechanical performances of SMA-13 asphalt mixture. Both types of asphalt mixtures experience increasing damage with more freeze–thaw cycles, indicating irreversible damage. The stability damage levels are similar, but basalt-fiber-modified SMA-13 has lower splitting strength damage and stiffness modulus damage compared to lignocellulosic-fiber-modified SMA-13. This suggests that adding basalt fibers enhances the resistance to freeze–thaw damage. Surface wear of asphalt mixtures under repeated freeze–thaw cycles is a complex and dynamic process. Fractal theory can uncover the mechanism of surface wear, while describing surface wear behavior and void deformation characteristics using fractal dimension, angularity, roundness, and aspect ratio is a logical and effective approach. The findings provide insights into freeze–thaw damage mechanisms at the microscopic level, highlighting the effects of reinforcement fibers. They provide valuable insights that can be used to optimize the design and maintenance of asphalt pavements.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Transportation, Jilin University, Changchun 130025, China.
- Jilin Traffic Planning and Design Institute, Changchun 130021, China.
ORCID-Profile: Wensheng Wang
Förderung
- Scientific Research Project of the Department of Education of Jilin Province
- Jilin University
Zitieren
APA
Wang, W., Yang, L., Cui, H., Wu, F., Cheng, Y., & Liang, C. (2023). Freeze–Thaw Damage Mechanism Analysis of SBS Asphalt Mixture Containing Basalt Fiber and Lignocellulosic Fiber Based on Microscopic Void Characteristics. Polymers, 15(19), 3887. https://doi.org/10.3390/polym15193887
Vancouver
Wang W, Yang L, Cui H, Wu F, Cheng Y, Liang C. Freeze–Thaw Damage Mechanism Analysis of SBS Asphalt Mixture Containing Basalt Fiber and Lignocellulosic Fiber Based on Microscopic Void Characteristics. Polymers. 2023;15(19):3887. doi:10.3390/polym15193887
BibTeX
@article{Wang2023,
author = {Wang, Wensheng and Yang, Liansheng and Cui, Honghai and Wu, Fei and Cheng, Yongchun and Liang, Chunyu},
title = {Freeze–Thaw Damage Mechanism Analysis of SBS Asphalt Mixture Containing Basalt Fiber and Lignocellulosic Fiber Based on Microscopic Void Characteristics},
journal = {Polymers},
year = {2023},
volume = {15},
number = {19},
pages = {3887},
doi = {10.3390/polym15193887}
}
EUVIMED