EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Light Conditions on the Antibacterial Performance and Mechanism of Waterborne Fluorescent Coatings Based on Waterproof Long Afterglow Phosphors/PDMS Composites

Sinan Hao iD, Yuhong Qi, Zhanping Zhang

Polymers · 24.09.2023 · 15 (19) · 3873

DOI: 10.3390/polym15193873 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 24.09.2023. Verfasst von Sinan Hao und 2 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Ship-Machinery Maintenance & Manufacture, Dalian Maritime University, Dalian 116026, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Marine microbial adhesion is the fundamental cause of large-scale biological fouling. Low surface energy coatings can prevent marine installations from biofouling; nevertheless, their static antifouling abilities are limited in the absence of shear forces produced by seawater. Novel waterborne antifouling coatings inspired by fluorescent coral were reported in this paper. Waterproof long afterglow phosphors (WLAP) were introduced into waterborne silicone elastomers by the physical blending method. The composite coatings store energy during the day, and the various colors of light emitted at night affect the regular physiological activities of marine bacteria. Due to the synergistic effect of fouling-release and fluorescence antifouling, the WLAP/polydimethylsiloxane (PDMS) composite coating showed excellent antifouling abilities. The antibacterial performance of coatings was tested under simulated day-night alternation, continuous light, and constant dark conditions, respectively. The results illustrated that the antibacterial performance of composite coatings under simulated day-night alternation conditions was significantly better than that under continuous light or darkness. The weak lights emitted by the coating can effectively inhibit the adhesion of bacteria. C-SB/PDMS showed the best antibacterial effect, with a bacterial adhesion rate (BAR) of only 3.7%. Constant strong light also affects the normal physiological behavior of bacteria, and the weak light of coatings was covered. The antibacterial ability of coatings primarily relied on their surface properties under continuous dark conditions. The fluorescent effect played a vital role in the synergetic antifouling mechanism. This study enhanced the static antifouling abilities of coatings and provided a new direction for environmentally friendly and long-acting marine antifouling coatings.

Schlagwörter

Stichwörter der Autor:innen

fluorescencefouling-releaselong afterglow phosphormarine bacteriapolydimethylsiloxanewaterborne

Autor:innen und Institutionen

  • Key Laboratory of Ship-Machinery Maintenance & Manufacture, Dalian Maritime University, Dalian 116026, China.
  • Department of Materials Science and Engineering, Dalian Maritime University, Dalian 116026, China.

ORCID-Profile: Sinan Hao

Förderung

  • the National Natural Science Foundation of China
  • National Natural Science Foundation of China

Zitieren

APA

Hao, S., Qi, Y., & Zhang, Z. (2023). Influence of Light Conditions on the Antibacterial Performance and Mechanism of Waterborne Fluorescent Coatings Based on Waterproof Long Afterglow Phosphors/PDMS Composites. Polymers, 15(19), 3873. https://doi.org/10.3390/polym15193873

Vancouver

Hao S, Qi Y, Zhang Z. Influence of Light Conditions on the Antibacterial Performance and Mechanism of Waterborne Fluorescent Coatings Based on Waterproof Long Afterglow Phosphors/PDMS Composites. Polymers. 2023;15(19):3873. doi:10.3390/polym15193873

BibTeX
@article{Hao2023,
  author = {Hao, Sinan and Qi, Yuhong and Zhang, Zhanping},
  title = {Influence of Light Conditions on the Antibacterial Performance and Mechanism of Waterborne Fluorescent Coatings Based on Waterproof Long Afterglow Phosphors/PDMS Composites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {19},
  pages = {3873},
  doi = {10.3390/polym15193873}
}
Kostenlos starten →