EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Simulation and Experimental Assessment of Laser Cutting Unidirectional CFRP at Cutting Angles of 45° and 90°

Jan Keuntje, Selim Mrzljak iD, Lars Gerdes iD, Verena Wippo, Stefan Kaierle, Frank Walther iD, Peter Jaeschke

Polymers · 21.09.2023 · 15 (18) · 3851

DOI: 10.3390/polym15183851 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.09.2023. Verfasst von Jan Keuntje und 6 weiteren Autor:innen. Beteiligte Einrichtung: Laser Zentrum Hannover e.V., 30419 Hannover, Germany. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, German Research Foundation (Deutsche Forschungsgemeinschaft, DFG).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser cutting of carbon fibre-reinforced plastics (CFRP) is a promising alternative to traditional manufacturing methods due to its non-contact nature and high automation potential. To establish the process for an industrial application, it is necessary to predict the temperature fields arising as a result of the laser energy input. Elevated temperatures during the cutting process can lead to damage in the composite’s matrix material, resulting in local changes in the structural properties and reduced material strength. To address this, a three-dimensional finite element model is developed to predict the temporal and spatial temperature evolution during laser cutting. Experimental values are compared with simulated temperatures, and the cutting kerf geometry is examined. Experiments are conducted at 45° and 90° cutting angles relative to the main fibre orientation using a 1.1 mm thick epoxy-based laminate. The simulation accurately captures the overall temperature field expansion caused by multiple laser beam passes over the workpiece. The influence of fibre orientation is evident, with deviations in specific temperature data indicating differences between the estimated and real material properties. The model tends to overestimate the ablation rate in the kerf geometry, attributed to mesh resolution limitations. Within the parameters investigated, hardly any expansion of a heat affected zone (HAZ) is visible, which is confirmed by the simulation results.

Schlagwörter

Stichwörter der Autor:innen

carbon fibre-reinforced plasticsfinite element modelheat affected zonelaser cuttingmacroscopic simulation

Autor:innen und Institutionen

  • Laser Zentrum Hannover e.V., 30419 Hannover, Germany.
  • Chair of Materials Test Engineering (WPT), TU Dortmund University, 44227 Dortmund, Germany.
  • Institute of Transport and Automation Technology, Leibniz University Hannover, 30167 Garbsen, Germany.

ORCID-Profile: Selim Mrzljak, Lars Gerdes, Frank Walther

Förderung

  • Deutsche Forschungsgemeinschaft
  • German Research Foundation (Deutsche Forschungsgemeinschaft, DFG)

Zitieren

APA

Keuntje, J., Mrzljak, S., Gerdes, L., Wippo, V., Kaierle, S., Walther, F., & Jaeschke, P. (2023). Finite Element Simulation and Experimental Assessment of Laser Cutting Unidirectional CFRP at Cutting Angles of 45° and 90°. Polymers, 15(18), 3851. https://doi.org/10.3390/polym15183851

Vancouver

Keuntje J, Mrzljak S, Gerdes L, Wippo V, Kaierle S, Walther F, et al. Finite Element Simulation and Experimental Assessment of Laser Cutting Unidirectional CFRP at Cutting Angles of 45° and 90°. Polymers. 2023;15(18):3851. doi:10.3390/polym15183851

BibTeX
@article{Keuntje2023,
  author = {Keuntje, Jan and Mrzljak, Selim and Gerdes, Lars and Wippo, Verena and Kaierle, Stefan and Walther, Frank and Jaeschke, Peter},
  title = {Finite Element Simulation and Experimental Assessment of Laser Cutting Unidirectional CFRP at Cutting Angles of 45° and 90°},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {18},
  pages = {3851},
  doi = {10.3390/polym15183851}
}
Kostenlos starten →