The Specific Encapsulation of Procyanidins from Litchi Peel and Coffee Pulp Extracts via Spray-Drying Using Green Polymers
Polymers · 19.09.2023 · 15 (18) · 3823
DOI: 10.3390/polym15183823 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 19.09.2023. Verfasst von María de Los Ángeles Vázquez-Núñez und 5 weiteren Autor:innen. Beteiligte Einrichtung: Facultad de Estudios Profesionales Zona Huasteca, Universidad Autónoma de San Luis Potosí, Romualdo del Campo 501, Colonia Rafael Curiel, Ciudad Vall…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tecnológico Nacional de México.
Abstract (Originalsprache)
Polyphenols called procyanidins can be extracted from agro-industrial waste like litchi peel and coffee pulp. However, their efficacy is limited due to instability, which hinders both the bioavailability and preservation of their activity. This study aims to establish the ideal encapsulation conditions required to preserve the procyanidin properties found in extracts taken from litchi peel and coffee pulp. To attain the maximum procyanidin encapsulation efficacy (EE), the Taguchi method was utilized to streamline the spray-drying conditions for different wall materials—maltodextrin (MD), whey protein (WP), citrus pectin (CP), and skim milk (SM). The optimized conditions consisted of feed flow (3, 4.5, and 6 mL/min), temperature (125, 150, and 175 °C), and airflow (30, 35, and 40 m3/h). The microcapsules were characterized using ABTS, DPPH, lipoperoxidation, and scanning electron microscopy. Objective evaluations revealed that MD was the most effective encapsulation material for the litchi extract, whereas WP was the optimal option for the coffee extract. Of all the factors considered in the spray-drying process, feed flow had the strongest impact. The spray-drying process for the litchi peel extracts achieved high procyanidin encapsulation efficiencies at a feed flow rate of 4.5 mL/min, a temperature of 150 °C, and an airflow rate of 35 m3/h. Meanwhile, the coffee extract spray drying achieved similar results at a feed flow rate of 4.5 mL/min, a temperature of 175 °C, and an airflow rate of 40 m3/h. Encapsulation efficiencies of 98.1% and 93.6% were observed for the litchi and coffee extracts, respectively, under the mentioned optimal conditions. The microencapsulation process was successful in preserving the antioxidant properties of procyanidins. The microcapsules’ size ranged from 2.6 to 3.2 micrometers. The results imply that the phenolic compounds present in the extracts function as effective antioxidant agents.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Facultad de Estudios Profesionales Zona Huasteca, Universidad Autónoma de San Luis Potosí, Romualdo del Campo 501, Colonia Rafael Curiel, Ciudad Valles 79060, San Luis Potosí, Mexico.
- Facultad de Ciencias Químicas-CIEP, Universidad Autónoma de San Luis Potosí, Av. Dr. Manuel Nava 6, Zona Universitaria, Mexico City 78210, San Luis Potosí, Mexico.
- CBQF-Centro de Biotecnologia e Química Fina-Laboratório Associado, Escola Superior de Biotecnologia, Universidade Católica Portuguesa, Rua Diogo Botelho 1327, 4169-005 Porto, Portugal.
- CIICYT-Centro de Investigación e Innovación Científica y Tecnológica, Unidad Camporredondo, Autonomous University of Coahuila, Saltillo 25280, Coahuila, Mexico.
- Engineering Department, Tecnológico Nacional de Mexico/I. T. de Ciudad Valles, Carretera al Ingenio Plan de Ayala km 2, Colonia Vista Hermosa, Ciudad Valles 79010, San Luis Potosí, Mexico.
ORCID-Profile: Mayra Aguilar-Zárate, Ricardo Gómez-García, Pedro Aguilar-Zárate, Mariela R Michel
Förderung
- Tecnológico Nacional de México
Zitieren
APA
Vázquez-Núñez, M. L. Á., Aguilar-Zárate, M., Gómez-García, R., Reyes-Luna, C., Aguilar-Zárate, P., & Michel, M. R. (2023). The Specific Encapsulation of Procyanidins from Litchi Peel and Coffee Pulp Extracts via Spray-Drying Using Green Polymers. Polymers, 15(18), 3823. https://doi.org/10.3390/polym15183823
Vancouver
Vázquez-Núñez MLÁ, Aguilar-Zárate M, Gómez-García R, Reyes-Luna C, Aguilar-Zárate P, Michel MR. The Specific Encapsulation of Procyanidins from Litchi Peel and Coffee Pulp Extracts via Spray-Drying Using Green Polymers. Polymers. 2023;15(18):3823. doi:10.3390/polym15183823
BibTeX
@article{VzquezNez2023,
author = {Vázquez-Núñez, María de Los Ángeles and Aguilar-Zárate, Mayra and Gómez-García, Ricardo and Reyes-Luna, Carlos and Aguilar-Zárate, Pedro and Michel, Mariela R},
title = {The Specific Encapsulation of Procyanidins from Litchi Peel and Coffee Pulp Extracts via Spray-Drying Using Green Polymers},
journal = {Polymers},
year = {2023},
volume = {15},
number = {18},
pages = {3823},
doi = {10.3390/polym15183823}
}
EUVIMED