EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Innovative Strategies for Technical-Economical Optimization of FDM Production

Dragoș Gabriel Zisopol iD, Maria Tănase iD, Alexandra Ileana Portoacă iD

Polymers · 16.09.2023 · 15 (18) · 3787

DOI: 10.3390/polym15183787 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.09.2023. Verfasst von Dragoș Gabriel Zisopol und 2 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Petroleum-Gas University of Ploiești, 100680 Ploiesti, Romania. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article introduces a multi-objective optimization approach for determining the best 3D printing parameters (layer thickness and infill percentage) to efficiently produce PLA and ABS parts, extensively analyzing mechanical behavior under tests for different traits such as tensile strength, compression, flexural, impact, and hardness. The value analysis method is used to optimize settings that balance use value (Vi- represented by mechanical characteristics) and production cost (Cp). Findings reveal that the infill percentage significantly influences the Vi/Cp ratio for tensile, compression, and hardness tests, while flexural tests are influenced by layer thickness. Impact strength is influenced nearly equally by both factors, with material-specific variations. The desirability function proved useful for optimizing processes with multiple responses, identifying the optimal parameters for the FDM process: a layer thickness of 0.15 mm with 100% infill percentage for PLA, a layer thickness of 0.20 mm with 100% infill percentage for annealed PLA, and a layer thickness of 0.15 mm with 100% infill percentage for ABS. Overall, this study guides efficient 3D printing parameter selection through a technical-economic optimization based on value analysis.

Schlagwörter

Stichwörter der Autor:innen

3D printingABSPLAannealingmechanical propertiesoptimizationprinting parametersvalue analysis

Autor:innen und Institutionen

  • Mechanical Engineering Department, Petroleum-Gas University of Ploiești, 100680 Ploiesti, Romania.

ORCID-Profile: Dragoș Gabriel Zisopol, Maria Tănase, Alexandra Ileana Portoacă

Zitieren

APA

Zisopol, D. G., Tănase, M., & Portoacă, A. I. (2023). Innovative Strategies for Technical-Economical Optimization of FDM Production. Polymers, 15(18), 3787. https://doi.org/10.3390/polym15183787

Vancouver

Zisopol DG, Tănase M, Portoacă AI. Innovative Strategies for Technical-Economical Optimization of FDM Production. Polymers. 2023;15(18):3787. doi:10.3390/polym15183787

BibTeX
@article{Zisopol2023,
  author = {Zisopol, Dragoș Gabriel and Tănase, Maria and Portoacă, Alexandra Ileana},
  title = {Innovative Strategies for Technical-Economical Optimization of FDM Production},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {18},
  pages = {3787},
  doi = {10.3390/polym15183787}
}
Kostenlos starten →