Thermoelectric Properties of One-Pot Hydrothermally Synthesized Solution-Processable PEDOT:PSS/MWCNT Composite Materials
Polymers · 15.09.2023 · 15 (18) · 3781
DOI: 10.3390/polym15183781 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.09.2023. Verfasst von Haibin Li und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xi'an Science and technology plan project, Key scientific research program of Shaanxi Provincial Department of Education, Opening Project of Shanxi Key Laboratory of Advanced Manufacturing Technology of North University of China.
Abstract (Originalsprache)
The combination of organic and inorganic materials has been considered an effective solution for achieving ambient thermoelectric energy harvesting and has been developing rapidly. Here, PEDOT:PSS/MWCNT (PPM) composite hydrogels were synthesized using the self-assembled gelation process of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and the interaction between PEDOT:PSS and multi-walled carbon nanotubes (MWCNTs) without the addition of any surfactant. After immersion in dimethyl sulfoxide and freeze-drying, the hydrogel is easily dispersed in water and used as a direct ink writing (DIW) 3D printing ink. At room temperature, the PPM-20 printed film with 20 wt% MWCNT solids achieved a maximum power factor of 7.37 μW m−1 K−2 and maintained stable thermoelectric properties during repeated bending cycles. On this basis, a thermoelectric generator (TEG) consisting of five legs was printed, which could be produced to generate an open circuit voltage of 6.4 mV and a maximum output power of 40.48 nW at a temperature gradient of 50 K, confirming its great potential for application in high-performance flexible organic/inorganic thermoelectric materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China.
- Faculty of Printing, Packaging Engineering and Digital Media Technology, Xi'an University of Technology, Xi'an 710048, China.
- Shaanxi Provincial Key Laboratory of Printing and Packaging Engineering, Xi'an University of Technology, Xi'an 710048, China.
- Shanxi Key Laboratory of Advanced Manufacturing Technology, North University of China, Taiyuan 038507, China.
ORCID-Profile: Shisheng Zhou
Förderung
- Xi'an Science and technology plan project
- Key scientific research program of Shaanxi Provincial Department of Education
- Opening Project of Shanxi Key Laboratory of Advanced Manufacturing Technology of North University of China
- General project of natural science basic research program of Shaanxi Provincial Department of Science and Technology
- Xi’an Science and technology plan project
Zitieren
APA
Li, H., Zhou, S., Han, S., Luo, R., Hu, J., Du, B., Yang, K., Bao, Y., Jia, J., & Zhang, X. (2023). Thermoelectric Properties of One-Pot Hydrothermally Synthesized Solution-Processable PEDOT:PSS/MWCNT Composite Materials. Polymers, 15(18), 3781. https://doi.org/10.3390/polym15183781
Vancouver
Li H, Zhou S, Han S, Luo R, Hu J, Du B, et al. Thermoelectric Properties of One-Pot Hydrothermally Synthesized Solution-Processable PEDOT:PSS/MWCNT Composite Materials. Polymers. 2023;15(18):3781. doi:10.3390/polym15183781
BibTeX
@article{Li2023,
author = {Li, Haibin and Zhou, Shisheng and Han, Shanxiang and Luo, Rubai and Hu, Jingbo and Du, Bin and Yang, Kenan and Bao, Yizhi and Jia, Junjie and Zhang, Xuemei},
title = {Thermoelectric Properties of One-Pot Hydrothermally Synthesized Solution-Processable PEDOT:PSS/MWCNT Composite Materials},
journal = {Polymers},
year = {2023},
volume = {15},
number = {18},
pages = {3781},
doi = {10.3390/polym15183781}
}
EUVIMED