Improving the Pervaporation Performance of PDMS Membranes for Trichloroethylene by Incorporating Silane-Modified ZSM-5 Zeolite
Polymers · 15.09.2023 · 15 (18) · 3777
DOI: 10.3390/polym15183777 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.09.2023. Verfasst von Xiaosan Song und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Gansu province.
Abstract (Originalsprache)
The hydrophobic nature of inorganic zeolite particles plays a crucial role in the efficacy of mixed matrix membranes (MMMs) for the separation of trichloroethylene (TCE) through pervaporation. This study presents a novel approach to further augment the hydrophobicity of ZSM-5. The ZSM-5 zeolite molecular sieve was subjected to modification using three different silane coupling agents, namely, n-octyltriethoxysilane (OTES), γ-methacryloxypropyltrimethoxysilane (KH-570), and γ-aminopropyltriethoxysilane (KH-550). The water contact angles of the resulting OTES@ZSM-5, KH-570@ZSM-5, and KH-550@ZSM-5 particles exhibited significant increases from 97.2° to 112.8°, 109.1°, and 102.7°, respectively, thereby indicating a notable enhancement in hydrophobicity. Subsequently, mixed matrix membranes (MMMs) were fabricated by incorporating the aforementioned silane-modified ZSM-5 particles into polydimethylsiloxane (PDMS), leading to a considerable improvement in the adsorption selectivity of these membranes towards trichloroethylene (TCE). The findings indicate that the PDMS membrane with a 20 wt.% OTES@ZSM-5 particle loading exhibits superior pervaporation performance. When subjected to a temperature of 30 °C, flow rate of 100 mL/min, and vacuum of 30 Kpa, the separation factor and total flux of a 3 × 10−7 wt.% TCE solution reach 328 and 155 gm−2·h−1, respectively. In comparison to the unmodified ZSM-5/PDMS membrane, the separation factor demonstrates a 41% increase, while the TCE flux experiences a 6% increase. Consequently, this approach effectively enhances the pervaporation separation capabilities of the PDMS membrane for TCE.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China.
- Key Laboratory of Yellow River Water Environment in Gansu Province, Lanzhou Jiaotong University, Lanzhou 730070, China.
ORCID-Profile: Xiaosan Song, Jishuo Fan
Förderung
- Natural Science Foundation of Gansu province
Zitieren
APA
Song, X., Song, X., Zhang, Y., & Fan, J. (2023). Improving the Pervaporation Performance of PDMS Membranes for Trichloroethylene by Incorporating Silane-Modified ZSM-5 Zeolite. Polymers, 15(18), 3777. https://doi.org/10.3390/polym15183777
Vancouver
Song X, Song X, Zhang Y, Fan J. Improving the Pervaporation Performance of PDMS Membranes for Trichloroethylene by Incorporating Silane-Modified ZSM-5 Zeolite. Polymers. 2023;15(18):3777. doi:10.3390/polym15183777
BibTeX
@article{Song2023,
author = {Song, Xiaosan and Song, Xichen and Zhang, Yue and Fan, Jishuo},
title = {Improving the Pervaporation Performance of PDMS Membranes for Trichloroethylene by Incorporating Silane-Modified ZSM-5 Zeolite},
journal = {Polymers},
year = {2023},
volume = {15},
number = {18},
pages = {3777},
doi = {10.3390/polym15183777}
}
EUVIMED