EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties and Non-Isothermal Crystallization Kinetics of Polylactic Acid Modified by Polyacrylic Elastomers and Cellulose Nanocrystals

Weixiao Meng, Xiaojie Zhang iD, Xiuli Hu iD, Yingchun Liu, Jimin Zhang, Xiongwei Qu, Beckry Abdel-Magid

Polymers · 14.09.2023 · 15 (18) · 3767

DOI: 10.3390/polym15183767 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.09.2023. Verfasst von Weixiao Meng und 6 weiteren Autor:innen. Beteiligte Einrichtung: Hebei Key Laboratory of Functional Polymers, School of Chemical Engineering, Hebei University of Technology, Tianjin 300130, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Government Guide the Development of Local Science and Technology Special Funds, Natural Science Foundation of Hebei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a polyacrylic elastomer latex with butyl acrylate (BA) as the core and methyl methacrylate (MMA) copolymerized with glycidyl methacrylate (GMA) as the shell, named poly(BA-MMA-GMA) (PBMG), was synthesized by seeded emulsion polymerization. Cellulose nanocrystal (CNC) was dispersed in the polyacrylic latex to prepare PBMG/CNC dispersions with different CNC contents. The dried product was mixed with polylactic acid (PLA) to fabricate PLA/PBMG/CNC blends. The addition of PBMG and PBMG/CNC improved the mechanical properties of the PLA matrix. Differential scanning calorimetry (DSC) was used to investigate the non-isothermal crystallization kinetics. The Avrami equation modified by the Jeziorny, Ozawa and Mo equations was used to analyze the non-isothermal crystallization kinetics of PLA and its blends. Analysis of the crystallization halftime of non-isothermal conditions indicated that the overall rate of crystallization increased significantly at 1 wt% content of CNC. This seemed to result from the increase of nucleation density and the acceleration of segment movement in the presence of the CNC component. This phenomenon was verified by polarizing microscope observation.

Schlagwörter

Stichwörter der Autor:innen

cellulose nanocrystalfabrication techniquenon-isothermal crystallization kineticspolyacrylic elastomerpolylactic acid

Autor:innen und Institutionen

  • Hebei Key Laboratory of Functional Polymers, School of Chemical Engineering, Hebei University of Technology, Tianjin 300130, China.
  • Jinghua Plastics Industry Co. Ltd., Langfang 065800, China.
  • Department of Composite Materials Engineering, Winona State University, Winona, MN 55987, USA.

ORCID-Profile: Xiaojie Zhang, Xiuli Hu

Förderung

  • National Natural Science Foundation of China
  • Government Guide the Development of Local Science and Technology Special Funds
  • Natural Science Foundation of Hebei Province

Zitieren

APA

Meng, W., Zhang, X., Hu, X., Liu, Y., Zhang, J., Qu, X., & Abdel-Magid, B. (2023). Mechanical Properties and Non-Isothermal Crystallization Kinetics of Polylactic Acid Modified by Polyacrylic Elastomers and Cellulose Nanocrystals. Polymers, 15(18), 3767. https://doi.org/10.3390/polym15183767

Vancouver

Meng W, Zhang X, Hu X, Liu Y, Zhang J, Qu X, et al. Mechanical Properties and Non-Isothermal Crystallization Kinetics of Polylactic Acid Modified by Polyacrylic Elastomers and Cellulose Nanocrystals. Polymers. 2023;15(18):3767. doi:10.3390/polym15183767

BibTeX
@article{Meng2023,
  author = {Meng, Weixiao and Zhang, Xiaojie and Hu, Xiuli and Liu, Yingchun and Zhang, Jimin and Qu, Xiongwei and Abdel-Magid, Beckry},
  title = {Mechanical Properties and Non-Isothermal Crystallization Kinetics of Polylactic Acid Modified by Polyacrylic Elastomers and Cellulose Nanocrystals},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {18},
  pages = {3767},
  doi = {10.3390/polym15183767}
}
Kostenlos starten →