Aqueous Cationic Fluorinated Polyurethane for Application in Novel UV-Curable Cathodic Electrodeposition Coatings
Polymers · 11.09.2023 · 15 (18) · 3725
DOI: 10.3390/polym15183725 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.09.2023. Verfasst von Junhua Chen und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental and Chemical Engineering, Zhaoqing University, Zhaoqing 526061, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong University Innovation Project, Zhaoqing University Science Fund, Guangdong Basic and Applied Basic Research Foundation.
Abstract (Originalsprache)
Aqueous polyurethane is an environmentally friendly, low-cost, high-performance resin with good abrasion resistance and strong adhesion. Cationic aqueous polyurethane is limited in cathodic electrophoretic coatings due to its complicated preparation process and its poor stability and single performance after emulsification and dispersion. The introduction of perfluoropolyether alcohol (PFPE-OH) and light curing technology can effectively improve the stability of aqueous polyurethane emulsions, and thus enhance the functionality of coating films. In this paper, a new UV-curable fluorinated polyurethane-based cathodic electrophoretic coating was prepared using cationic polyurethane as a precursor, introducing PFPE-OH capping, and grafting hydroxyethyl methacrylate (HEMA). The results showed that the presence of perfluoropolyether alcohol in the structure affected the variation of the moisture content of the paint film after flash evaporation. Based on the emulsion particle size and morphology tests, it can be assumed that the fluorinated cationic polyurethane emulsion is a core–shell structure with hydrophobic ends encapsulated in the polymer and hydrophilic ends on the outer surface. After abrasion testing and baking, the fluorine atoms of the coating were found to increase from 8.89% to 27.34%. The static contact angle of the coating to water was 104.6 ± 3°, and the water droplets rolled off without traces, indicating that the coating is hydrophobic. The coating has excellent thermal stability and tensile properties. The coating also passed the tests of impact resistance, flexibility, adhesion, and resistance to chemical corrosion in extreme environments. This study provides a new idea for the construction of a new and efficient cathodic electrophoretic coating system, and also provides more areas for the promotion of cationic polyurethane to practical applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Environmental and Chemical Engineering, Zhaoqing University, Zhaoqing 526061, China.
- Guangdong Provincial Key Laboratory of Environmental Health and Land Resource, College of Environmental and Chemical Engineering, Zhaoqing University, Zhaoqing 526061, China.
- Green Fine Chemical Joint Laboratory, Qingyuan 511542, China.
- China Electronic Product Reliability and Environmental Testing Research Institute, Guangzhou 511370, China.
ORCID-Profile: Junhua Chen, Zhihao Zeng, Feihua Ye
Förderung
- Guangdong University Innovation Project
- Zhaoqing University Science Fund
- Guangdong Basic and Applied Basic Research Foundation
- Guangdong Province Enterprise Science and Technology Special Representative
Zitieren
APA
Chen, J., Zeng, Z., Liu, C., Wang, X., Li, S., Ye, F., Li, C., & Guan, X. (2023). Aqueous Cationic Fluorinated Polyurethane for Application in Novel UV-Curable Cathodic Electrodeposition Coatings. Polymers, 15(18), 3725. https://doi.org/10.3390/polym15183725
Vancouver
Chen J, Zeng Z, Liu C, Wang X, Li S, Ye F, et al. Aqueous Cationic Fluorinated Polyurethane for Application in Novel UV-Curable Cathodic Electrodeposition Coatings. Polymers. 2023;15(18):3725. doi:10.3390/polym15183725
BibTeX
@article{Chen2023,
author = {Chen, Junhua and Zeng, Zhihao and Liu, Can and Wang, Xuan and Li, Shiting and Ye, Feihua and Li, Chunsheng and Guan, Xiaoxiao},
title = {Aqueous Cationic Fluorinated Polyurethane for Application in Novel UV-Curable Cathodic Electrodeposition Coatings},
journal = {Polymers},
year = {2023},
volume = {15},
number = {18},
pages = {3725},
doi = {10.3390/polym15183725}
}
EUVIMED