EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Vitro Degradation of 3D-Printed Poly(L-lactide-Co-Glycolic Acid) Scaffolds for Tissue Engineering Applications

Anushree Ghosh Dastidar iD, Susan A Clarke iD, Eneko Larrañeta iD, Fraser Buchanan iD, Krishna Manda iD

Polymers · 09.09.2023 · 15 (18) · 3714

DOI: 10.3390/polym15183714 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.09.2023. Verfasst von Anushree Ghosh Dastidar und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Aerospace Engineering, Queen's University Belfast, Belfast BT9 5AH, UK. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wellcome Trust, Engineering and Physical Sciences Research Council (EPSRC), the Wellcome Trust.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The creation of scaffolds for cartilage tissue engineering has faced significant challenges in developing constructs that can provide sufficient biomechanical support and offer suitable degradation characteristics. Ideally, such tissue-engineering techniques necessitate the fabrication of scaffolds that mirror the mechanical characteristics of the articular cartilage while degrading safely without damaging the regenerating tissues. The aim of this study was to create porous, biomechanically comparable 3D-printed scaffolds made from Poly(L-lactide-co-glycolide) 85:15 and to assess their degradation at physiological conditions 37 °C in pH 7.4 phosphate-buffered saline (PBS) for up to 56 days. Furthermore, the effect of scaffold degradation on the cell viability and proliferation of human bone marrow mesenchymal stem cells (HBMSC) was evaluated in vitro. To assess the long-term degradation of the scaffolds, accelerated degradation tests were performed at an elevated temperature of 47 °C for 28 days. The results show that the fabricated scaffolds were porous with an interconnected architecture and had comparable biomechanical properties to native cartilage. The degradative changes indicated stable degradation at physiological conditions with no significant effect on the properties of the scaffold and biocompatibility of the scaffold to HBMSC. Furthermore, the accelerated degradation tests showed consistent degradation of the scaffolds even in the long term without the notable release of acidic byproducts. It is hoped that the fabrication and degradation characteristics of this scaffold will, in the future, translate into a potential medical device for cartilage tissue regeneration.

Schlagwörter

Stichwörter der Autor:innen

acceleratedbioresorbablecartilage tissue engineeringdegradationpoly(L-lactide-co-glycolide)

Autor:innen und Institutionen

  • School of Mechanical and Aerospace Engineering, Queen's University Belfast, Belfast BT9 5AH, UK.
  • School of Nursing and Midwifery, Queen's University Belfast, Belfast BT9 7BL, UK.
  • School of Pharmacy, Queen's University Belfast, Belfast BT9 7BL, UK.

ORCID-Profile: Anushree Ghosh Dastidar, Susan A Clarke, Eneko Larrañeta, Fraser Buchanan, Krishna Manda

Förderung

  • Wellcome Trust
  • Engineering and Physical Sciences Research Council (EPSRC)
  • the Wellcome Trust

Zitieren

APA

Ghosh Dastidar, A., Clarke, S. A., Larrañeta, E., Buchanan, F., & Manda, K. (2023). In Vitro Degradation of 3D-Printed Poly(L-lactide-Co-Glycolic Acid) Scaffolds for Tissue Engineering Applications. Polymers, 15(18), 3714. https://doi.org/10.3390/polym15183714

Vancouver

Ghosh Dastidar A, Clarke SA, Larrañeta E, Buchanan F, Manda K. In Vitro Degradation of 3D-Printed Poly(L-lactide-Co-Glycolic Acid) Scaffolds for Tissue Engineering Applications. Polymers. 2023;15(18):3714. doi:10.3390/polym15183714

BibTeX
@article{GhoshDastidar2023,
  author = {Ghosh Dastidar, Anushree and Clarke, Susan A and Larrañeta, Eneko and Buchanan, Fraser and Manda, Krishna},
  title = {In Vitro Degradation of 3D-Printed Poly(L-lactide-Co-Glycolic Acid) Scaffolds for Tissue Engineering Applications},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {18},
  pages = {3714},
  doi = {10.3390/polym15183714}
}
Kostenlos starten →